| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| BMW Cyclonic Air/Oil Separator plumbing question http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=69522 |
Page 1 of 1 |
| Author: | Toolmaker [ Tue Jul 10, 2012 8:18 am ] |
| Post subject: | BMW Cyclonic Air/Oil Separator plumbing question |
I originally bought the clear 3/4" hose to do the EHM but later decided to get the BMW Cyclonic Air/Oil Separator. Would it be OK to use the clear hose to plumb in the BMW separator or do I need a different type of hose? Thanks! |
|
| Author: | Rich [ Tue Jul 10, 2012 10:54 am ] |
| Post subject: | Re: BMW Cyclonic Air/Oil Separator plumbing question |
Toolmaker wrote: I originally bought the clear 3/4" hose to do the EHM but later decided to get the BMW Cyclonic Air/Oil Separator. Would it be OK to use the clear hose to plumb in the BMW separator or do I need a different type of hose? Thanks! Is your clear hose rated for petroleum? If it is... you will have no problems at all. If it is not rated, you may get some deterioration after a while. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|