LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/
545 RFE Valve body http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=71714	Page 1 of 1

---

Author:	jthomas999 [ Wed Sep 19, 2012 11:08 pm ]
Post subject:	545 RFE Valve body
Has anyone done a valve body replacement on a Liberty CRD? http://www.moes-performance.com/SharaDo ... p/s3vb.htm This looks like a bolt in... John

---

Author:	papaindigo [ Thu Sep 20, 2012 8:12 am ]
Post subject:	Re: 545 RFE Valve body
Dropping the valve body is an essential part of installing the Transgo kit and involves dropping the tranny pan, remove the tranny filters, and undoing like 6 bolts on the valve body. See an older writeup at http://liberty.eurekaboy.com/transgo.htm (Note the resistor mentioned is no longer used as, IIRC, the TCM just "learns" around it). I'll leave others who know more than I to comment about this product vs simply installing a transgo kit. The latter does not appear at all difficult once you have pulled the valve body and the cost is much less. Yes I do have a transgo kit but SunCoast did the install as part of my TC upgrade.

---

Author:	striperman36 [ Thu Sep 20, 2012 10:11 am ]
Post subject:	Re: 545 RFE Valve body
Install the TransGo kit much stronger

---

Author:	kdlewis1975 [ Thu Sep 20, 2012 12:02 pm ]
Post subject:	Re: 545 RFE Valve body
I have the Sharadon Stage II in my CRD. It comes with the Transgo kit installed. What I don't know is if the do anything beyond installing the shift kit in the case of stage 2. Sharadon has a website and would suggest calling and talking to Denny. After my TC let go I replaced both the front pump and opted for a rebuilt valve body. Sharadon has a presence on the net in Hemi forums, so I felt more comfortable with that than getting a remanufactured one from eBay at the time. OEM was just too pricey. Sent from my DROID RAZR using Tapatalk 2

---

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/