I'm not posative but I believe the reason for small lifts or no lifts being available for the CRD is because the left axle shaft is to short to allow it
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| CRD lift, most say not for CRD? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=72047 |
Page 1 of 1 |
| Author: | 4wheeldeal [ Wed Oct 17, 2012 2:33 pm ] |
| Post subject: | CRD lift, most say not for CRD? |
Odd, I've been looking around for a 2.5 lift but they all say not for CRD that I've found. Just looking for a cheaper lift like the Daystar one. Suggestions? Thanks |
|
| Author: | jlgail4309 [ Wed Oct 17, 2012 6:09 pm ] |
| Post subject: | Re: CRD lift, most say not for CRD? |
Day star has one for the crd just have look a little bit. Item Number: KJ09123BK JEEP KJ LIBERTY 02-07 1.5" LIFT KIT, GAS AND DIESEL http://www.daystarweb.com |
|
| Author: | 4wheeldeal [ Wed Oct 17, 2012 6:20 pm ] |
| Post subject: | Re: CRD lift, most say not for CRD? |
jlgail4309 wrote: Day star has one for the crd just have look a little bit. Item Number: KJ09123BK JEEP KJ LIBERTY 02-07 1.5" LIFT KIT, GAS AND DIESEL http://www.daystarweb.com Hmm just 1.5 eh not sure if that's worth the hassel for just 1.5 inches, is there any other options ? |
|
| Author: | Glend [ Wed Oct 17, 2012 7:23 pm ] |
| Post subject: | Re: CRD lift, most say not for CRD? |
Murchison Products (here in Australia) has both 2" and 3" lift kits for the CRD. Most of the lifted CRDs over here use his gear. It's heavy duty and especially designed for the CRD. Uses specially made King Springs, and OME shock/strut equipment. These lifts have stood up to everything the Australian outback can throw a them. http://www.murchisonproducts.com.au/crd ... ension.php I have run the 3" lift for four years now and no problems at all. |
|
| Author: | 4wheeldeal [ Wed Oct 17, 2012 7:35 pm ] |
| Post subject: | Re: CRD lift, most say not for CRD? |
Glend wrote: Murchison Products (here in Australia) has both 2" and 3" lift kits for the CRD. Most of the lifted CRDs over here use his gear. It's heavy duty and especially designed for the CRD. Uses specially made King Springs, and OME shock/strut equipment. These lifts have stood up to everything the Australian outback can throw a them. http://www.murchisonproducts.com.au/crd ... ension.php I have run the 3" lift for four years now and no problems at all. looks good, but his sites messed up, can't see prices and the text is over lapping the photos, email link doesn't work either. odd. |
|
| Author: | Diesel derelict [ Wed Oct 17, 2012 8:35 pm ] |
| Post subject: | Re: CRD lift, most say not for CRD? |
The motor is a few hundred pounds hevyer so most of the cheaper ones are blocks |
|
| Author: | Joe Romas [ Thu Oct 18, 2012 7:41 am ] |
| Post subject: | Re: CRD lift, most say not for CRD? |
I'm not posative but I believe the reason for small lifts or no lifts being available for the CRD is because the left axle shaft is to short to allow it
|
|
| Author: | fastRob [ Thu Oct 18, 2012 2:42 pm ] |
| Post subject: | Re: CRD lift, most say not for CRD? |
I suggest lifting 1 inch. The beast was lowered for the primary driver, the mom with crazy kids, for stability. I used Jeepin by Al arms so you can replace ball joints. Suggest you do not spend the money like i did for the OME springs and shocks. Just get good springs and good shocks with 1 inch lift, your front end parts will live longer for it. just my opinion. |
|
| Author: | tjkj2002 [ Thu Oct 18, 2012 3:00 pm ] |
| Post subject: | Re: CRD lift, most say not for CRD? |
fastRob wrote: Suggest you do not spend the money like i did for the OME springs and shocks. Just get good springs and good shocks with 1 inch lift, your front end parts will live longer for it. just my opinion. The OME 790 coils are the only good option to lift a CRD.Otherwise your still stuck with sagging,wornout,rough riding,bad shocks if using the daystar spacer lift and all the other coils are rated under the OEM CRD coils so you'll sag faster and have a terrible ride still which makes braking and other safety concerns a scary thought. |
|
| Author: | fastRob [ Thu Oct 18, 2012 5:25 pm ] |
| Post subject: | Re: CRD lift, most say not for CRD? |
tjkj2002 wrote: fastRob wrote: Suggest you do not spend the money like i did for the OME springs and shocks. Just get good springs and good shocks with 1 inch lift, your front end parts will live longer for it. just my opinion. The OME 790 coils are the only good option to lift a CRD.Otherwise your still stuck with sagging,wornout,rough riding,bad shocks if using the daystar spacer lift and all the other coils are rated under the OEM CRD coils so you'll sag faster and have a terrible ride still which makes braking and other safety concerns a scary thought. You heard it from the man. The OME coils are good, just make sure you get the right ones. Shocks too, get the right ones. |
|
| Author: | Lancer [ Fri Oct 19, 2012 5:03 am ] |
| Post subject: | Re: CRD lift, most say not for CRD? |
I fitted OME 790 at the front and 948 at the rear with OME Nitrocharger Sport shocks. The ride is so much better, the lift is about 2.5" and the handling is also improved. |
|
| Author: | DynoPax [ Fri Oct 19, 2012 1:59 pm ] |
| Post subject: | Re: CRD lift, most say not for CRD? |
Lancer wrote: I fitted OME 790 at the front and 948 at the rear with OME Nitrocharger Sport shocks. The ride is so much better, the lift is about 2.5" and the handling is also improved. Copycat here, and very satisfied to this day... OME is the way to go 
|
|
| Author: | skates04 [ Fri Oct 19, 2012 2:07 pm ] |
| Post subject: | Re: CRD lift, most say not for CRD? |
Lancer wrote: I fitted OME 790 at the front and 948 at the rear with OME Nitrocharger Sport shocks. The ride is so much better, the lift is about 2.5" and the handling is also improved. I am running the same lift on my CRD, but I have rancho's in the back. (I am not a fan of the Rancho's and will be replacing soon) I am running a 265/75/16 tire with wheel spacers. Had to do the typical trimming, pounding the pinch weld.  Uploaded with ImageShack.us |
|
| Author: | ATXKJ [ Sat Oct 20, 2012 9:06 am ] |
| Post subject: | Re: CRD lift, most say not for CRD? |
The OME 790's are definitely the best idea. However the reason the 2 1/2" lifts say Not for CRD - is because the drivers side CV is shorter on the CRD than the V6 so when you try to install it - you have very high odds of tearing the CV boot. That's the reason Daystar started saying the 2 1/2" is not for the CRD and All-J's stopped the CRD Frankenlift with spacer. That doesn't mean it can't be done - I ran the Daystar 2 1/2" for a couple of years before OME decided to make the 790 coils. and a couple of folks are still running the CRD Frankenlift with 3/4" spacer on 790's if you can get it assembled it works great - but many people have torn CV boots trying it so the companies don't want to sell something with that failure rate - so they label them 'Not for CRD' |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|