viewtopic.php?f=5&t=72529
And about the coolant loss, the EGR cooler may be leaking internally...
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Time to Order Parts.... Completed http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=74387 |
Page 1 of 1 |
| Author: | Valve Stem [ Mon Mar 04, 2013 11:28 pm ] |
| Post subject: | Time to Order Parts.... Completed |
Well like it says I'm ready to order parts for the mistress.... What I want to do is the.. Timming belt everything but the thermostat, and only the front half of water pump, and serp belt. I really need the Torque Converter done, also the shudder is bad like really bad starts around 42-43 mph and will change the trans oil with aft +4 and both filters I have to do the glow plugs also...I have the ETecno1 GX3123 7V steel drop in replacements (thanks to texascrd (group buy)) Well I have to decide on if I need to do the head gasket or not....I have been loosing coolant the past couple months having to refill about an inch of coolant every month...no drips...added coolant dye and have a good uv light can't find a leak anywhere so I figured that it is just burning it off...........I have a check engine light on for the MAF unplugged and also P1263 glow plug #3 bad all others ohmed at 0.7....so I think with me loosing coolant and no leak I think the head gasket it shot. So the motor will be opened up for the timming belt should I just go ahead and go the rest of the way for the head gasket or not??? and do the arp stud change over? Amazon has the kit for $340.20 for 2 kits I think either way I will take the valve cover off and check the rockers/lifters for play since the motor will be opened up that far might as well just inspect them as well. So I need your guys wonderful help on what I shoud do for the HG, and where to buy all the part... I know got everything in the basket at IDparts for $1,691.35 which include timming belt kit, euro tq, trans filter/fluid kit, cyc. head install kit, valve cover gasket/bolts, both intake square gaskets and o-ring Thanks in advance for the help....this forum is a really big help (should be the new updated Mopar manual for the CRD) lol and if anyone has the tools and time to do it or help I pay for your labor/beer I can come to you or you can come here just let me know $$$ if not it will go to the diesel shop and not the stealiership |
|
| Author: | jtz54 [ Tue Mar 05, 2013 12:27 am ] |
| Post subject: | Re: Time to Order Parts....but want quailty and lowest price |
I highly recommend idparts.com They carry write a few parts for the CRD at very reasonable prices. I'm ordering a euro converter from them soon at $549 which includes $100 core charge. I had an issue with a water pump last year and they overnighted an OEM replacement with no extra charge. |
|
| Author: | tonycrd [ Wed Mar 06, 2013 7:35 am ] |
| Post subject: | Re: Time to Order Parts....but want quailty and lowest price |
viewtopic.php?f=5&t=72529 And about the coolant loss, the EGR cooler may be leaking internally... |
|
| Author: | Hexus [ Wed Mar 06, 2013 8:39 am ] |
| Post subject: | Re: Time to Order Parts....but want quailty and lowest price |
Jeepantalaktika on Ebay is where it's at. Order early as shipping takes a bit but definitely worth it. Right now he has a Complete Kit for $493. By Complete I mean: Graf Water Pump Front 1/2 (100% compatibility verified in person by yours truly) + Gaskets OEM Tensioner OEM Idler x 2 Goodyear (OEM in Europe) Timing Belt Fuju Serpentine Belt Sealey Timing Pins for Intake/Exhaust Hex Key for Flex Plate / Flywheel Timing While the only way this could be any better is if it included VM.1085(Ha Ha, yeah right). I got my stuff from him, and can verify him personally as a quality source. Link: http://www.ebay.com/itm/TIMING-BELT-KIT-WATER-PUMP-FOR-JEEP-CHEROKEE-LIBERTY-2-8L-TD-OR-2-5L-CRD-02-07-/271165311874?pt=Motors_Car_Truck_Parts_Accessories&hash=item3f22b64b82&vxp=mtr |
|
| Author: | Valve Stem [ Wed Mar 06, 2013 9:35 pm ] |
| Post subject: | Re: Time to Order Parts....but want quailty and lowest price |
Thanks for the info tonycrd wrote: And about the coolant loss, the EGR cooler may be leaking internally... never thought about that but that will be getting eliminated this spring when it gets warmer out... So I contacted two place to do the work and decided for just the fun of it the dealer also The dealer will let me get my own parts and there labor time they said it would take them 13 hours and $1350 just for timing belt, headgasket, water pump, and glow plugs Well for now I will put off the TQ until later on when the funds come back up in couple of months |
|
| Author: | Hexus [ Thu Mar 07, 2013 7:41 am ] |
| Post subject: | Re: Time to Order Parts....but want quailty and lowest price |
$1350 going all the way to the Head Gasket really isn't a bad price. You better go ahead and replace your rockers/lifters while you are there for longevity sake. There shouldn't be any extra charge if you buy the parts because they have to take them out to remove the head to replace the head gasket anyways. I might have paid $1350 for labor had I known what I was getting into had the dealer accepted me buying my own parts, most only let you buy parts from them. |
|
| Author: | Valve Stem [ Wed Mar 13, 2013 1:00 pm ] |
| Post subject: | Re: Time to Order Parts....but want quailty and lowest price |
Well I think I am going to do the work myself...Just ordered the the timing belt kit and rockers for idparts.....Order the ARP studs form summit also I think I am going to just go buy the Miller VM tools 4 out of 5 just not the 1085 since I have a tool that will work buy just tighting one cam bolt at a time...since it seams like everyone has their tools rented out or just dont want to rent them out which is fine....the 4 tools are only $154 directly from Millerspecialtools.com Once I get it apart ill have to order the HG when I know the size and hopefully idparts can get the elring HG since I wouldn't need the torque to yield bolts Then ill just need to order the tap or hopefully a thread chaser, the piolt and couterbore |
|
| Author: | Hexus [ Wed Mar 13, 2013 1:21 pm ] |
| Post subject: | Re: Time to Order Parts....but want quailty and lowest price |
Sealey also sells a set you can get around $120, exact same tools. http://www.ebay.com/itm/Sealey-VSE5056-Diesel-Engine-Setting-Locking-Kit-Chrysler-LDV-2-5-2-8CRD-Bel-/300775382013?pt=UK_BOI_Industrial_Tools_Construction_Tools_ET&hash=item46079c1bfd |
|
| Author: | Valve Stem [ Wed Mar 13, 2013 1:30 pm ] |
| Post subject: | Re: Time to Order Parts....but want quailty and lowest price |
Yeah I seen that $120 + shipping from Great Britain or $154 + free shipping from the USA....$34 for hopefully high quality USA tools |
|
| Author: | audiboy86 [ Wed Mar 13, 2013 5:34 pm ] |
| Post subject: | Re: Time to Order Parts....but want quailty and lowest price |
Idparts all the way top quality parts and the source them from the engine manufacture directly. Plus call them they are extremely knowledgeable and straight forward. |
|
| Author: | thermorex [ Wed Mar 13, 2013 5:58 pm ] |
| Post subject: | Time to Order Parts....but want quailty and lowest prices |
audiboy86 wrote: Idparts all the way top quality parts and the source them from the engine manufacture directly. Plus call them they are extremely knowledgeable and straight forward. Too bad they don't sell the tools, at least not as far as I know... But they seem nice fellas |
|
| Author: | cevans [ Mon Mar 18, 2013 8:14 pm ] |
| Post subject: | Re: Time to Order Parts....but want quailty and lowest price |
thermorex wrote: audiboy86 wrote: Idparts all the way top quality parts and the source them from the engine manufacture directly. Plus call them they are extremely knowledgeable and straight forward. Too bad they don't sell the tools, at least not as far as I know... But they seem nice fellas We don't sell the tools since we can't get them at any better deal than SPX Miller specialty tools. We'd stock them in a heartbeat if we could match/beat miller pricing. |
|
| Author: | audiboy86 [ Tue Mar 19, 2013 6:03 pm ] |
| Post subject: | Re: Time to Order Parts....but want quailty and lowest price |
Cevans please tell me you are either a worker at idparts or on up the later there because if so I have some questions. |
|
| Author: | Valve Stem [ Sat Apr 20, 2013 11:50 am ] |
| Post subject: | Re: Time to Order Parts.... Completed |
So here everything striped down  http://www.flickr.com/photos/95139636@N08/8662476299/ Trubo before cleaning  http://www.flickr.com/photos/95139636@N08/8662489419/ turbo after oven cleaner...not much difference  http://www.flickr.com/photos/95139636@N08/8662515199/ head before cleaning  http://www.flickr.com/photos/95139636@N08/8663595934/ head on  http://www.flickr.com/photos/95139636@N08/8663610848/ ARP studs torqued down  http://www.flickr.com/photos/95139636@N08/8663607896/ nice smooth head  http://www.flickr.com/photos/95139636@N08/8662500651/ and YES 120 FT. LBS. on the outside studs is still enough to crush the glow plug holes  http://www.flickr.com/photos/95139636@N08/8662518115/ well here is the coolant that came out of the radiator ?orange?  and here is what's in the block  you can that the dealer put in the wrong coolant..nice and green |
|
| Author: | TennesseeCRD [ Sun Apr 21, 2013 9:08 pm ] |
| Post subject: | Re: Time to Order Parts....but want quailty and lowest price |
Hexus wrote: Jeepantalaktika on Ebay is where it's at. Order early as shipping takes a bit but definitely worth it. Right now he has a Complete Kit for $493. By Complete I mean: Graf Water Pump Front 1/2 (100% compatibility verified in person by yours truly) + Gaskets OEM Tensioner OEM Idler x 2 Goodyear (OEM in Europe) Timing Belt Fuju Serpentine Belt Sealey Timing Pins for Intake/Exhaust Hex Key for Flex Plate / Flywheel Timing While the only way this could be any better is if it included VM.1085(Ha Ha, yeah right). I got my stuff from him, and can verify him personally as a quality source. Link: http://www.ebay.com/itm/TIMING-BELT-KIT-WATER-PUMP-FOR-JEEP-CHEROKEE-LIBERTY-2-8L-TD-OR-2-5L-CRD-02-07-/271165311874?pt=Motors_Car_Truck_Parts_Accessories&hash=item3f22b64b82&vxp=mtr I just checked ebay. The kit is up to $533 now. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|