Hi guys i bought an elm 327 Bt dongle and Torque pro and i want to read my MAF values but all i can get is the RPM so please help me set it up to get the readings. Thanks
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| ELM 327 & Torque Pro MAF http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=74740 |
Page 1 of 1 |
| Author: | Srytrucker [ Sun Mar 31, 2013 1:29 pm ] |
| Post subject: | ELM 327 & Torque Pro MAF |
Hi guys i bought an elm 327 Bt dongle and Torque pro and i want to read my MAF values but all i can get is the RPM so please help me set it up to get the readings. Thanks
|
|
| Author: | ChooChooman74 [ Sun Mar 31, 2013 2:30 pm ] |
| Post subject: | Re: ELM 327 & Torque Pro MAF |
Use iso 9141-2 Sent from my DROID BIONIC using Tapatalk 2 |
|
| Author: | Srytrucker [ Sun Mar 31, 2013 4:05 pm ] |
| Post subject: | Re: ELM 327 & Torque Pro MAF |
Thanks for letting me know but i do not seem to find the setup screen where i can change the values so if you can please explain in Noob-proof way that will be great. |
|
| Author: | DOC4444 [ Sun Mar 31, 2013 5:39 pm ] |
| Post subject: | Re: ELM 327 & Torque Pro MAF |
I would sign up for the Torque Forum, if you have not already. There are a lot of non-intuitive features that vary from phone to phone. They should be able to help for your specific phone. DOC |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|