| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Engine Install: lining up the torque converter http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=75992 |
Page 1 of 1 |
| Author: | R2.0 [ Tue Jul 16, 2013 7:48 pm ] |
| Post subject: | Engine Install: lining up the torque converter |
I got my engine back into the chassis and mated up with the transmission. But now it looks like the torque converter isn't in the correct position - I simply cannot seem to get the flex plate hole to line up with the TC attachment boss. Is there any way to rotate the torque converter so one of the mounting holes is lined up on the access window? Given what it took to get tghe engine in I REALLY do not want to have to pull it again. |
|
| Author: | EAB [ Tue Jul 16, 2013 11:11 pm ] |
| Post subject: | Re: Engine Install: lining up the torque converter |
You should be able to stick a finger through a hole in the flex plate to turn the TC, thats what i had to do. |
|
| Author: | Glend [ Tue Jul 16, 2013 11:25 pm ] |
| Post subject: | Re: Engine Install: lining up the torque converter |
deleted |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|