| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| P0101 cel in 2005 http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=76352 |
Page 1 of 1 |
| Author: | Krystofer [ Fri Aug 16, 2013 10:22 pm ] |
| Post subject: | P0101 cel in 2005 |
Can't shake the P0101 Replaced the hose to the turbo, which did have a crack, reset the code, but it came back. Cleaned the MAF, reset, but it came back Cleaned the MAP, reset, but it came back Replaced air filter, reset, but it came back ...any other thoughts on what to do next? Cheers, Krystofer |
|
| Author: | Hexus [ Sat Aug 17, 2013 6:47 am ] |
| Post subject: | Re: P0101 cel in 2005 |
Unplug and re-plug (firmly) both of the sensors on the intake air box. |
|
| Author: | MrMopar64 [ Sun Aug 18, 2013 11:44 am ] |
| Post subject: | Re: P0101 cel in 2005 |
If you have the P0101 code and the MAF and all the plumbing is good, then it's usually a good indication that the rocker arms are worn and the valves are not opening all the way. Have you done yet the T-belt and/or rocker arm check yet? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|