So it's been about a month since we got our CRD. I got one motor mount in on the right side, transferred the shield and had to order one more cause Dallas Dodge sent me a tranny mount for that side...Changed the T stat and the temp. gauge went from 1/4 to 1/2, now there is "closed loop"... Did the ORM and cleaned the MAP during the first week. I added some Sea Foam to the tranny when I did the motor mount cause I was encountering inconsistent ES vs. MPH. 1700rpm = 55mph and 1900rpm = 60mph. Since the SF the ES is 1500rpm = 55mph. Lock up seems to occur at 60 plus mph. and I encountered a shudder now that the temp. is in spec. The speed ohmmeter is slow by about 4 miles too, any suggestions? I know we need new tires but not sure it will help the problem.
