| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| The enevitable glow plug replacement http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=76784 |
Page 1 of 1 |
| Author: | jeepdan [ Wed Sep 18, 2013 2:18 pm ] |
| Post subject: | The enevitable glow plug replacement |
I went to clear the CEL this morning so that I can pass the yearly state safety inspection and surprise I have a code #1261 for #1 glow plug  I had been doing the ORM on CRD #2 so it came as a surprise that I had an extra trouble code. Anyhow, I guess I will put in the 5volt Mopar replacement plugs and module that I bought last year, and get a small loan for a GDE tune. At 124,000 miles, I probably should borrow extra money and order new rocker/lifters while I'm at it. |
|
| Author: | Hexus [ Wed Sep 18, 2013 3:59 pm ] |
| Post subject: | Re: The enevitable glow plug replacement |
jeepdan wrote: I went to clear the CEL this morning so that I can pass the yearly state safety inspection and surprise I have a code #1261 for #1 glow plug I had been doing the ORM on CRD #2 so it came as a surprise that I had an extra trouble code. Anyhow, I guess I will put in the 5volt Mopar replacement plugs and module that I bought last year, and get a small loan for a GDE tune. At 124,000 miles, I probably should borrow extra money and order new rocker/lifters while I'm at it. You can get the steel ones for $100, no ECU change, no module, no BS. Why would you mess with the ceramics that are known to break off? |
|
| Author: | cerich [ Wed Sep 18, 2013 4:38 pm ] |
| Post subject: | Re: The enevitable glow plug replacement |
the new mopar 5v units aren't ceramic, and he is most likely messing with because he already has the new mopar kit. So he can spend $50 to use his kit he has or $100 plus shipping to get the 7v steel ones from ID Parts. Hexus wrote: jeepdan wrote: I went to clear the CEL this morning so that I can pass the yearly state safety inspection and surprise I have a code #1261 for #1 glow plug I had been doing the ORM on CRD #2 so it came as a surprise that I had an extra trouble code. Anyhow, I guess I will put in the 5volt Mopar replacement plugs and module that I bought last year, and get a small loan for a GDE tune. At 124,000 miles, I probably should borrow extra money and order new rocker/lifters while I'm at it. You can get the steel ones for $100, no ECU change, no module, no BS. Why would you mess with the ceramics that are known to break off? |
|
| Author: | jeepdan [ Wed Sep 18, 2013 8:35 pm ] |
| Post subject: | Re: The enevitable glow plug replacement |
Yes, I had already bought the Mopar steel replacement glow plugs and module, that's why I'm going that route. And, I want a GDE tune for the other CRD. It's just a matter of bad timing, but things rarely break down during a good time. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|