These are most of the specs...
for anyone who needs them
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Torque specs? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=77283 |
Page 1 of 1 |
| Author: | Ranger175 [ Wed Nov 06, 2013 3:20 am ] |
| Post subject: | Torque specs? |
What are the torque specs needed for the replacement of the timing belt on '05 Liberty CRD? |
|
| Author: | Hexus [ Wed Nov 06, 2013 9:34 am ] |
| Post subject: | Re: Torque specs? |
For which part? If you want someone to type out all the torque specs for all the bolts involved, well that'll have to be someone else. There is a link in the Noob Guide where you can download the entire service manual which provides all the torque specs for the timing belt process, but you have several bolts which need to be torqued in that process, a list would be tedious to say the least. If you need any other pointers or have any other questions, feel free to ask. |
|
| Author: | WWDiesel [ Wed Nov 06, 2013 10:34 pm ] |
| Post subject: | Re: Torque specs? |
These are most of the specs... for anyone who needs them
|
|
| Author: | Hexus [ Thu Nov 07, 2013 5:03 pm ] |
| Post subject: | Re: Torque specs? |
I was thinking of torque specs for the whole job, not just the timing belt cover and parts past when you take off the whole serpentine belt assembly, tensioner, Crank, etc. Guess I've done too many top ends. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|