| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| CRD 3 inch lift http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=77536 |
Page 1 of 1 |
| Author: | LS12FAST4U [ Mon Nov 25, 2013 11:23 pm ] |
| Post subject: | CRD 3 inch lift |
I'm going to use the OME springs but I need to know how many isolators in fro t and rear I will need to get to 3 inches of lift. |
|
| Author: | Brianawd [ Mon Nov 25, 2013 11:49 pm ] |
| Post subject: | Re: CRD 3 inch lift |
LS12FAST4U wrote: I'm going to use the OME springs but I need to know how many isolators in fro t and rear I will need to get to 3 inches of lift. For the front use a top plate or clevis lift to get 3in or a little over. For the back use one extra upper isolator |
|
| Author: | LS12FAST4U [ Tue Nov 26, 2013 12:41 am ] |
| Post subject: | Re: CRD 3 inch lift |
So all I need is one in the front and one in the rear? |
|
| Author: | Brianawd [ Tue Nov 26, 2013 1:02 am ] |
| Post subject: | Re: CRD 3 inch lift |
LS12FAST4U wrote: So all I need is one in the front and one in the rear? You need OME 948 rear springs with one extra upper spring insulator. http://jeepinbyal.com/jeep-liberty-kj/r ... lator.html Front you need OME 790 front springs with a top plate or a clevis lift. http://jeepinbyal.com/jeep-liberty-kj/f ... truts.html http://jeepinbyal.com/jeep-liberty-kj/f ... e-set.html |
|
| Author: | LS12FAST4U [ Tue Nov 26, 2013 11:37 am ] |
| Post subject: | Re: CRD 3 inch lift |
Thank you |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|