people still ask me if I realized I'm pumping diesel
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| What hapened to your Jeep CRD Today? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=78156 |
Page 1 of 3 |
| Author: | kjjet [ Tue Jan 28, 2014 10:17 pm ] |
| Post subject: | What hapened to your Jeep CRD Today? |
List problems you had with your JEEP CRD TODAY. (This post is to create a list of problems people are having) My power steering stopped working. Fluid was full. Then trying to turn the wheel, the Right side of the rack popped a seal. Thanks KJJET |
|
| Author: | brando26 [ Tue Jan 28, 2014 10:28 pm ] |
| Post subject: | Re: What hapened to your Jeep CRD Today? |
1. Leaky head gasket. Cooling system always pressurized even when cold. 2. Thermostat stuck open 3. Power steering pump and pinion leaking. Sent from my SPH-L710 using Tapatalk |
|
| Author: | ebbnflow [ Tue Jan 28, 2014 11:22 pm ] |
| Post subject: | Re: What hapened to your Jeep CRD Today? |
I'm still fighting with a very harsh 2-3 shift most of the time. Other times it is smooth as silk. Doing a quick learn on the tcm makes it subside for a couple of weeks, but then it comes back. Replaced solinoid pack, fluid ATF+4 and Mopar filters with no change what so ever. Also inspected the valve body for bad seals and score marks. She runs like a top other than this issue which is driving me crazy. |
|
| Author: | camo [ Wed Jan 29, 2014 12:23 am ] |
| Post subject: | Re: What hapened to your Jeep CRD Today? |
people still ask me if I realized I'm pumping diesel
|
|
| Author: | flman [ Wed Jan 29, 2014 8:44 am ] |
| Post subject: | Re: What hapened to your Jeep CRD Today? |
Both of mine served me well, except the one with the Etecnos started a little rough. |
|
| Author: | mass-hole [ Wed Jan 29, 2014 10:29 am ] |
| Post subject: | Re: What hapened to your Jeep CRD Today? |
1. Motor stumbles and loses power until i let off the gas for a few seconds. I guess this must be air in the fuel? 2. Cruise control does not work at all, not even the light on the dash when i hit the on/off button. |
|
| Author: | dkenny [ Wed Jan 29, 2014 1:01 pm ] |
| Post subject: | Re: What hapened to your Jeep CRD Today? |
it got snowed on!!! not going anywhere today.. -dkenny |
|
| Author: | flman [ Wed Jan 29, 2014 3:57 pm ] |
| Post subject: | Re: What hapened to your Jeep CRD Today? |
TJKJ is gonna love this thread.  Instant Ammo! I can bet there is nothing like it in the gasser section? |
|
| Author: | brando26 [ Wed Jan 29, 2014 8:18 pm ] |
| Post subject: | Re: What hapened to your Jeep CRD Today? |
Heads warped... fml. Sent from my SPH-L710 using Tapatalk |
|
| Author: | flman [ Thu Jan 30, 2014 7:54 am ] |
| Post subject: | Re: What hapened to your Jeep CRD Today? |
brando26 wrote: Heads warped... fml. Sent from my SPH-L710 using Tapatalk How warped is it, and who told you this? If it is .004 or less you can reuse it. |
|
| Author: | kjjet [ Sun Feb 02, 2014 11:24 pm ] |
| Post subject: | Re: What hapened to your Jeep CRD Today? |
To the top |
|
| Author: | brando26 [ Tue Feb 04, 2014 1:42 pm ] |
| Post subject: | Re: What hapened to your Jeep CRD Today? |
Ill call and ask. Because the warranty company denied my claim based on the vehicle being altered with larger tires. My head asploded. Sent from my SPH-L710 using Tapatalk |
|
| Author: | brando26 [ Tue Feb 04, 2014 1:49 pm ] |
| Post subject: | Re: What hapened to your Jeep CRD Today? |
Several different specs across the head. .004 .005 .006 in different places. Sent from my SPH-L710 using Tapatalk |
|
| Author: | kjjet [ Wed Feb 05, 2014 8:25 pm ] |
| Post subject: | Re: What hapened to your Jeep CRD Today? |
CEL light on again. #2 glow plug Bad again. |
|
| Author: | flman [ Wed Feb 05, 2014 8:32 pm ] |
| Post subject: | Re: What hapened to your Jeep CRD Today? |
kjjet wrote: CEL light on again. #2 glow plug Bad again. I guess those Etecnos are no good? |
|
| Author: | kjjet [ Wed Feb 05, 2014 10:11 pm ] |
| Post subject: | Re: What hapened to your Jeep CRD Today? |
flman wrote: kjjet wrote: CEL light on again. #2 glow plug Bad again. I guess those Etecnos are no good? #2 keeps failing? I'm still using the original Module P/N 56044671AA. Wondering if I should try the newer Module for the 5V P/N 56044671AC? Should not need to. But they may last longer?? Anyone try? Thanks KJJET |
|
| Author: | Mike92104 [ Thu Feb 06, 2014 12:02 am ] |
| Post subject: | Re: What hapened to your Jeep CRD Today? |
kjjet wrote: flman wrote: kjjet wrote: CEL light on again. #2 glow plug Bad again. I guess those Etecnos are no good? #2 keeps failing? I'm still using the original Module P/N 56044671AA. Wondering if I should try the newer Module for the 5V P/N 56044671AC? Should not need to. But they may last longer?? Anyone try? Thanks KJJET I thought I read that Etecno was looking into all the plug failures that have been happening. I would contact them and see if they'll send you a new one or four. |
|
| Author: | RTTT265 [ Thu Feb 06, 2014 10:58 pm ] |
| Post subject: | Re: What hapened to your Jeep CRD Today? |
Jeep didn't get wet today, but everything else happened 
|
|
| Author: | LMWatBullRun [ Fri Feb 07, 2014 1:37 pm ] |
| Post subject: | Re: What hapened to your Jeep CRD Today? |
brando26 wrote: Several different specs across the head. .004 .005 .006 in different places. Sent from my SPH-L710 using Tapatalk If it is less than 0.010" stud it and move on. Studs will pull it into intimate contact with the HG and block. |
|
| Author: | kjjet [ Fri Feb 14, 2014 9:48 pm ] |
| Post subject: | Re: What hapened to your Jeep CRD Today? |
Found that the noise I was hearing was the serpentine belt idler pulleys are bad. I replace them at 96k and now have 115k. I don't recall where I got them, but I think they were crown. Replacing with OEM. |
|
| Page 1 of 3 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|