Here are the part numbers from the boxes I bought, about 1 year and 20,000 miles later no shudder with GDE Eco Full Torque Tune. I also installed a Trans Go Shift Kit at the time.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Mopar updated torque converter and pump part numbers? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=78196 |
Page 1 of 1 |
| Author: | MRausch82 [ Mon Feb 03, 2014 10:29 am ] |
| Post subject: | Mopar updated torque converter and pump part numbers? |
I did a search, but was not coming up with anything for some reason... Does anyone have the part numbers for the most recent and reliable Mopar (ROFL!) torque converters and updated pump assembly? I am getting worsening shuddering in lockup around 50-55 and 59-62mph while under a load. I seem to recall the Euro TC is not available in the US any longer, so what is the latest fix? I don't really want to go the Suncoast route yet... I want to get factory so if it does go Tango Uniform, my buddy who owns a dealership will take care of it for me. He has one of the only decent Chrysler/Jeep dealers I have found. I've never had a warranty or non warranty issue with them... I figure I will have the tranny serviced, and new filters and anti-drainback valve installed at the same time. |
|
| Author: | hucorey [ Mon Feb 03, 2014 12:20 pm ] |
| Post subject: | Re: Mopar updated torque converter and pump part numbers? |
To be honest to fix it once. Edge torque converters. No affiliation with Edge programmers. |
|
| Author: | hucorey [ Mon Feb 03, 2014 12:21 pm ] |
| Post subject: | Re: Mopar updated torque converter and pump part numbers? |
SharaDon Performance is who I'd talk to about the pump and or a valve body. |
|
| Author: | MRausch82 [ Tue Feb 04, 2014 11:52 am ] |
| Post subject: | Re: Mopar updated torque converter and pump part numbers? |
Thanks for the info, but I really want to stick with the stock TC/pump for the moment. I have a stock CRD, and need the warranty from Chrysler. My friend owns a dealership, so I do not have any issues with getting things warrantied from him. I am planning a move, and will need to be doing a bit of towing with the CRD. If it breaks, I don't want to be SOL with an aftermarket part. Are these the correct and most current p/n's for the updated (and good) parts? 68009879AB - pump, oil. RL037142AA - converter, torque. |
|
| Author: | 65Corvair [ Tue Feb 04, 2014 12:00 pm ] |
| Post subject: | Re: Mopar updated torque converter and pump part numbers? |
Here are the part numbers from the boxes I bought, about 1 year and 20,000 miles later no shudder with GDE Eco Full Torque Tune. I also installed a Trans Go Shift Kit at the time.
|
|
| Author: | MRausch82 [ Tue Feb 04, 2014 1:03 pm ] |
| Post subject: | Re: Mopar updated torque converter and pump part numbers? |
Thanks! That was exactly the info I was looking for. Glad to hear they are working out. I am getting tired of the shuddering... |
|
| Author: | hucorey [ Tue Feb 18, 2014 5:21 am ] |
| Post subject: | Re: Mopar updated torque converter and pump part numbers? |
MRausch82 wrote: Thanks for the info, but I really want to stick with the stock TC/pump for the moment. I have a stock CRD, and need the warranty from Chrysler. My friend owns a dealership, so I do not have any issues with getting things warrantied from him. I am planning a move, and will need to be doing a bit of towing with the CRD. If it breaks, I don't want to be SOL with an aftermarket part. Are these the correct and most current p/n's for the updated (and good) parts? 68009879AB - pump, oil. RL037142AA - converter, torque. How in the world do you still have a warranty?? I wish there was a dealer like that where I live. |
|
| Author: | orbanator7577 [ Tue Aug 05, 2014 10:28 am ] |
| Post subject: | Re: Mopar updated torque converter and pump part numbers? |
My Heep has has had the slipping TC more and more lately. Last weekend I pulled out of my driveway and the engine stalled. It was impossible to start again and threw no codes. After reading several threads on this forum and others, I realized the transmission pump has failed me or part(valve) of it anyways. I ordered a new pump, euro tc, filters, and a PML Deep pan for extra cooling here in TX. Anything else you might think I may need while I have it down? I have already replaced the solenoid pack and installed the bottom half of the shift kit. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|