RFCRD wrote:
Goglio704 wrote:
grywlfbg wrote:
According to this posting by oldnavy, the refineries are supposed add lubricity to make up the difference. It should be better for your engine all around.
http://www.lostjeeps.com/forum/phpBB3/vie ... php?t=8240I'm all for using biodiesel but this whole lubricity thing smacks of fear mongering.
It wasn't imaginary the first time around when we transitioned to LSD in the 90's. Pumps sprang leaks and pumps failed internally. Hopefully it goes better this time.
This subject goes beyond pump problems. You have to also look at the lubricity requirements of the internal workings of those little electronic fuel injectors with close to 24K psi behind them.
Common problem in Detroit Diesel products when LSD was introduced. Detroit's don't have a central injection pump, instead each cylinder has it own pump in the form of a "unit" injector that is powered off the cam/rocker arm. Inside that unit injector is a small electronic solonoid valve to control injector timing (similliar timing mechanism to electronic common rail injectors) which became prone to failure/jambing when LSD was introduced.
VW uses the PumP Duce on it's cars, but is I guess switching over to common rail starting in '07 MY from what I hear. They had a lot of problems with proper spec oils to keep the cam from scarring.
I agree that the lubricity thing is the talk of fear mongers, and if you just always use an adative till everyone gets switched over to the ULSD for awhile you will not have a problem with lubricity. Big time true if you buy B2, B5, B10, B20, B99 or B100 fuel.