| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Help pulling engine http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=78824 |
Page 1 of 1 |
| Author: | jthomas999 [ Sat Apr 12, 2014 6:19 pm ] |
| Post subject: | Help pulling engine |
2006 CRD, trying to get the engine pulled. In the shop manual, after pulling the starter, it says to removew the engine to transmission collar and has a picture. I don't see a engine to transmission collar. I have removed the bottom 4 bolts on the trans housing, 2 facing forward and 2 facing rear. How do I get to the flexplate/torque convertor bolts? Thanks in advance, John |
|
| Author: | jthomas999 [ Sat Apr 12, 2014 7:50 pm ] |
| Post subject: | Re: Help pulling engine |
I found it. There is a rubber plug above where the start is to gain access. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|