Need 2006 Liberty CRD power steering bracket
Need 2006 Liberty CRD power steering bracket

Does anybody have the bracket that the power steering pump and tensioner pulley bolts to on a Jeep Liberty CRD diesel?

Check the length of the bolt that holds your tensioner pulley on. Mine was only about 60 mm long. Only a few threads made it into the brace - about 3/8" or so. It eventually stripped out.

There was at least another 1/2" of threads that were unused. It's doubtful that a longer bolt would have stripped out.

You might be able to check to see if the tensioner bolt is long enough by looking at the back of the bracket with a mirror. IF you can not see the bolt from the backside I would get a longer M10x1.5 washer head bolt and install it.

It calls for a 70 mm bolt. I used an 80 mm bolt with a nut on the backside after installing a threaded insert.

Had I found the part number for the bracket and checked price and availability first I would have gone that route.

9 05093935AA 1 EN0 DBB BRACKET, Tensioner

http://www.colorado4wheel.com/manuals/J ... _FICHE.pdf

_________________
2006 Jeep Liberty CRD 142,000 miles New engine 2-2014, Green Eco tune, FS2500 bypass filter Weeks elbow, European Torque converter, brakes front UCA's wheel bearing and front hubs. Front hitch OEM lift pump
98 K2500 Suburban 6.5td
96 K1500 " 6.5td
95 2 door Tahoe 6.5td
94 K3500 cc srw 5 speed 6.5td
91 International Model 6 speed spicer 4700