| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Another torque converter question. http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=79738 |
Page 1 of 1 |
| Author: | Dougbob [ Thu Jul 31, 2014 12:01 pm ] |
| Post subject: | Another torque converter question. |
I called my local transmission parts warehouse and they say they sell 2 torque converters for the CRD motor. The first being the "liberty TC". The second being the "liberty / Hemi TC". He also stated the second also had the "angled fins". Is this a good TC to use? I really only want to replace it once, but to get the suncoast is over $800 shipped to me. |
|
| Author: | GreenDieselEngineering [ Thu Jul 31, 2014 12:05 pm ] |
| Post subject: | Re: Another torque converter question. |
68037142AA or R8037142AA or RL037142AA are all part numbers for the mopar Euro TC. This unit has a 400 ftlb lockup clutch and should be enough for the CRD. Hope it works out. |
|
| Author: | WWDiesel [ Thu Jul 31, 2014 4:58 pm ] |
| Post subject: | Re: Another torque converter question. |
These are the numbers: Read this thread, lots of good information on TC's. http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=78775&hilit=+torque Stock Mopar OEM TC is rated for 300 ft. lbs. max (406 Nm) Mopar Euro TC is rated for 400 ft. lbs. max (~ 542 Nm) Suncoast CRD-1ES TC is rated for 600 ft. lbs. max (813 Nm) If you ever plan to increase the HP & torque of your CRD with a reflash, be advised of the TC's limits.... 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|