| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| injector torque setting http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=80081 |
Page 1 of 1 |
| Author: | lacabrera [ Tue Sep 02, 2014 5:25 pm ] |
| Post subject: | injector torque setting |
Can any one tell me the torque setting for the injector bolt. Been searching for it with no joy. I don't wont to over tighten it and strip the thread. |
|
| Author: | Mike92104 [ Tue Sep 02, 2014 11:32 pm ] |
| Post subject: | Re: injector torque setting |
From the FSM: "...Torque bolt to 32.4 N·m (24 ft. lbs.).." |
|
| Author: | lacabrera [ Wed Sep 03, 2014 3:57 am ] |
| Post subject: | Re: injector torque setting |
Mike92104 wrote: From the FSM: "...Torque bolt to 32.4 N·m (24 ft. lbs.).." Many thanks for the info Mike |
|
| Author: | lacabrera [ Sat Sep 06, 2014 11:53 am ] |
| Post subject: | Re: injector torque setting |
Mike92104 wrote: From the FSM: "...Torque bolt to 32.4 N·m (24 ft. lbs.).." Just checked these figures in the work shop manual. 32.4 N-m or 18lbs. Mike is right but I feel its to much for the alloy head. I would go no more than 18lbs as stated in the manual. Just shows that the manual can be wrong with 32.4 N-m |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|