Hi guys i tried the parts list and was unable to find part number for Headlight bolts as couple of them are missing. The MAP sensor bolt fell into engine bay never to be recovered when i cleaned the sensor last time.

moparpartsonline.com

_________________
'05 CRD Limited
Pricol EGT, Boost
GDE Hot '11; EDGE Trail switched
SEGR; Provent; Magnaflow;
Suncoast T\C, Transgo Tow'n'Go switch;
Cummins LP module, Fleetguard filter, Filterminder
2.5" Daystar f, OME r; Ranchos; K80767's, Al's lifted uppers
Rubicons, 2.55 Goodyears
Four in a row really makes it go

MAP sensor bolt is nothing special. Small metric thread ca. 1/2-3/4" long just look for proper thread in a hex head from any decent hardware store. Probably can get close based on what will go thru MAP sensor bolt hole. Not sure about headlight bolts but if you have even one try matching at same store.

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs

thanks for helping as the web link is't much help either

KJ FSM's and Parts manual:

http://colorado4wheel.com/manuals/Jeep/KJ/

_________________
'05 CRD Limited
Pricol EGT, Boost
GDE Hot '11; EDGE Trail switched
SEGR; Provent; Magnaflow;
Suncoast T\C, Transgo Tow'n'Go switch;
Cummins LP module, Fleetguard filter, Filterminder
2.5" Daystar f, OME r; Ranchos; K80767's, Al's lifted uppers
Rubicons, 2.55 Goodyears
Four in a row really makes it go