What app will show fuel pressure??? I have a ELM327 Wifi OBD II module that I need rouse to see fuel pressure. Does anyone know of a app that will display fuel pressure? Thanks!


Sent from my iPhone using Tapatalk

On my android tablet I use TorquePro.

_________________
U.S. Army Retired

I should have mentioned that I would like to install it on my iphone. Thx
I do not see it in the App Store. Dang it


Sent from my iPhone using Tapatalk

I use engine link for iPhone, but quite honestly, I like torque pro more. I still have an android phone. But you can always get a very cheap android tablet and torque pro, you can get a great deal from eBay.

_________________
2005 kj CRD, samco, suncoast tc, provent, Kennedy lift pump, GDE ECO full torque, 2nd gen filter head, 245/70/16 a/t tires, mopar light bar, fumoto oil valve, OEM Skid Plates, ARB Front bumper and HD OME, tru cool LPD47391 40k GVW tranny cooler (stock cooler delete), FF Dynamics e-fan and shroud, rocker arms replaced, HDS2 190F thermostat.

Torque and a $5 Bluetooth OBDII adapter is a must for every Android device owner and if you don't have an Android device it's pretty compelling reason to pick up a cheap tablet. Luckily you should be able to use the WiFi adapter you already bought.

_________________
Share your ideas freely at https://www.facebook.com/groups/libertydiesels/

Ok, so engine link shows fuel pressure? I guess I could use one of the kids Androids. Thx for the input.


Sent from my iPhone using Tapatalk

Let me go check before you buy it. I'll let you know in a bit.

_________________
2005 kj CRD, samco, suncoast tc, provent, Kennedy lift pump, GDE ECO full torque, 2nd gen filter head, 245/70/16 a/t tires, mopar light bar, fumoto oil valve, OEM Skid Plates, ARB Front bumper and HD OME, tru cool LPD47391 40k GVW tranny cooler (stock cooler delete), FF Dynamics e-fan and shroud, rocker arms replaced, HDS2 190F thermostat.

Sorry, it seems that my obd2 adapter that goes with the iPhone app is in my wife's car and shes gone... But I did a capture on my jeep on idle with torque pro and Android phone, I did have the correct obd2 adapter in the jeep... Overall you may be cheaper with torque pro if you have the adapter already.


This is using the raw data display.

_________________
2005 kj CRD, samco, suncoast tc, provent, Kennedy lift pump, GDE ECO full torque, 2nd gen filter head, 245/70/16 a/t tires, mopar light bar, fumoto oil valve, OEM Skid Plates, ARB Front bumper and HD OME, tru cool LPD47391 40k GVW tranny cooler (stock cooler delete), FF Dynamics e-fan and shroud, rocker arms replaced, HDS2 190F thermostat.