| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Racor filter head http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=81839 |
Page 1 of 1 |
| Author: | dan86 [ Wed Apr 15, 2015 4:55 am ] |
| Post subject: | Racor filter head |
Can anybody tell me the size of the o ring on the bowl of the Racor filter head? Thanks in advance. 2003 KJ Liberty 2.5 CRD |
|
| Author: | Drewd [ Thu Apr 16, 2015 5:43 pm ] |
| Post subject: | Re: Racor filter head |
I tried to take the bowl off the filter to measure the o-ring and don't have the hand strength to do so anymore due to accident and subsequent surgery on my dominant wrist. I estimate the o-ring to be a minimum of 3 inches and not more than 3.25 inches in diameter. |
|
| Author: | KaspinCRD [ Fri Apr 17, 2015 1:16 am ] |
| Post subject: | Re: Racor filter head |
The aftermarket R25S I have uses .125" thickness and 3.25" ID o-ring. If your older em export uses the R25S filters, it should be the same. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|