It is currently Sat Oct 24, 2026 12:02 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 28 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: CRD PERFORMANCE CHIPS AND ACCESSORIES
PostPosted: Fri May 05, 2006 8:49 pm 
Offline
LOST Newbie

Joined: Fri May 05, 2006 8:29 pm
Posts: 4
Location: Mesa, Arizona
I want a CRD really bad, but I havent been able to find any performance
chip information online. On my fathers Cummins, he got something so
that at any RPM he gets some boost, no matter if it is at idle or at 3k. On
the liberty, from what I understand, you have to be above 1200 rpm
before the turbo even kicks in. CRIPES!!

This is what I would like:
1. Performance Chip
2. Performance Air Intake
3. Performance Exhaust (good sound, and more power)
4. Something to tell the friggin waste-gate to stay open ALL THE TIME
5. Winshield wiper fluid Injection
6. 2" Lift

If any of you know how to get some of these things, and prices, I would
be so thankful. I mean is it bad to be the "BIGGEST AND BADEST"!! If
and when I buy one, I want to go in FULL BORE, not 1/2 @$$.

Thanks


-BEANS-


Top
 Profile  
 
 Post subject:
PostPosted: Fri May 05, 2006 9:27 pm 
Offline
LOST Member

Joined: Thu Oct 06, 2005 9:39 pm
Posts: 253
Location: Fort Mill, SC
ONE WORD!!!!.......... search


btw, welcome to the site.

Allen

_________________
2007 Wrangler Unlimted X 4x4 (Wife's Daily Driver)

2005 Toyota Tundra V8 4X4 TRD (ebay baby!!)

1984 Jeep CJ7 (Toy)


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 06, 2006 8:36 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Feb 17, 2006 8:39 pm
Posts: 257
Location: Powder Springs, GA
Well, Beans, Welcome.

If you want to keep the waste gate open all the time you will have the slowest CRD on the road. :oops: :P :D

I think you should reconsider it and maybe you want it closed most of the time if not all the time or replace the existing turbo with a non waste gate unit for better boost, etc. :lol:
Performance boxes that are currently available.

[/url]http://www.tsperformance.com/home.asp[url]

[/url]http://drperformance.com/shop/product_reviews_info.php?products_id=91&reviews_id=3[url]

[/url]http://dieselpowermodule.com/[url]

[/url]http://www.kmdieselperformance.com/dodge.html[url]

Also Edge products is working on a module but they are not close enough to give a date

As for the exhaust there have been several threads on the list about what folks have done to date. There are no decent kit out for the CRD. I am going to put a 3"-3.5" system on mine from the turbo exhaust flange back eventually. First I want to get some decent instrumentation; EGT, Boost, Rail Press and do a base line dyno. Them I will install a decent intake filter and redyno. Then do the exhaust and dyno. I have been thinking about getting my performance module now and dyno with that also before and after. Why would anyone want to inject windshield washer fluid into their CRD?? :twisted: :shock: :P Is this a modified for of water injection?

Again, Welcome.

_________________
Barr
06 JLL CRD 04/06/06 23K+ mi., Amsoil, Racor Fuel Filter, EHM, ORM, 3" SS exh from Turbo back, Fumoto, 245/70/16 Grabber AT2
Waiting for installation: TransGo 45RFE-HD2, S&B Air Filter, ProVent
06 Jetta TDI/DSG, RC1+, VAG-COM,
V-65 Drag Bike


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 06, 2006 4:48 pm 
Offline
LOST Newbie

Joined: Fri May 05, 2006 8:29 pm
Posts: 4
Location: Mesa, Arizona
Hi, thanks for the response. To answer your question, winshield wiper fluid is similar to water injection. I dont know all that much about it, but I have a friend that did it, and it gives him an extra 100hp and cools his exhaust temp when pulling on his Cummins diesel. It is pretty kewl stuff.

Thanks for the sites. I will look into them, and probably be ordering my CRD on sunday at the dealership.

:D

-BEANS-


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 06, 2006 7:13 pm 
Offline
LOST Junkie

Joined: Sat Jul 09, 2005 9:22 pm
Posts: 814
Location: Camas, WA
If your going to be ordering a CRD, you're to late. The orders for this year closed the 19th of last month. Ran out of engines. The Unlimited Rubicon is also closed for the year I hear. Better scramble and find one at a dealer you like.

_________________
No one knows as much as all of us.


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 06, 2006 8:01 pm 
spoonplugger1 wrote:
If your going to be ordering a CRD, you're to late. The orders for this year closed the 19th of last month. Ran out of engines. The Unlimited Rubicon is also closed for the year I hear. Better scramble and find one at a dealer you like.


The orders were still open when I emailed jeepwarehouse.com on April 25th, and they are still open now at jeepwarehouse.com. Maybe your dealer is not interested in selling anything other than their own inventory.


Top
  
 
 Post subject:
PostPosted: Sun May 07, 2006 10:24 am 
Offline
LOST Addict
User avatar

Joined: Tue Oct 18, 2005 10:12 pm
Posts: 3255
Location: SwampEast MO
alljeep wrote:
spoonplugger1 wrote:
If your going to be ordering a CRD, you're to late. The orders for this year closed the 19th of last month. Ran out of engines. The Unlimited Rubicon is also closed for the year I hear. Better scramble and find one at a dealer you like.


The orders were still open when I emailed jeepwarehouse.com on April 25th, and they are still open now at jeepwarehouse.com. Maybe your dealer is not interested in selling anything other than their own inventory.
The CRD is still available for ordering as per Dodge official website, Sprinter is not and hasn't been for some months now.

_________________
91 MB 300D 2.5L Turbo. Her's

05 MB E320 CDI. Mine


Top
 Profile  
 
 Post subject:
PostPosted: Sun May 07, 2006 6:48 pm 
Offline
LOST Newbie

Joined: Mon Feb 06, 2006 10:29 pm
Posts: 10
Location: Tualatin, OR
“As for the exhaust there have been several threads on the list about what folks have done to date. There are no decent kit out for the CRD. I am going to put a 3"-3.5" system on mine from the turbo exhaust flange back eventually. “

We just put our 3” cat back prototype on the road last Thursday. Initial results on our system vs. a 2.5” performance system are very positive. Better and quieter sound and more pull mid to high rpm range. The system is bolt on, mandrel bent, has excellent ground clearance and uses a factory style flange for a clean and perfect fit. A “cat included” system will eventually be available.

_________________
Thank you, John
John Bendit
Diesel Power USA
dieselpowermodule.com
A division of Upscale Automotive, Inc.
19460 SW 89th Ave.
Tualatin, OR 97062
503-692-0846


Top
 Profile  
 
 Post subject:
PostPosted: Sun May 07, 2006 7:34 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Mon Apr 17, 2006 10:22 pm
Posts: 413
Location: UP of Michigan
scubanw3 when it is ready for the public, email me I would be interested in one.

_________________
2005 Silver Limited CRD 53,000 miles
GDE EcoTune / Trans tune
PML Differential Cover/Crankcase Mod
Tal & Hadas Grill Guard/TransGo Shift Kit
V-6 AirBox/Lunar Boost & EGT
Lund Cold Weather Grill Insert
OEM updated Filter Head, Cummins Lift Pump


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 08, 2006 1:45 am 
Offline
LOST Addict

Joined: Fri Sep 16, 2005 2:01 am
Posts: 1944
Location: Mooresville, NC
BEANS wrote:
Hi, thanks for the response. To answer your question, winshield wiper fluid is similar to water injection. I dont know all that much about it, but I have a friend that did it, and it gives him an extra 100hp and cools his exhaust temp when pulling on his Cummins diesel. It is pretty kewl stuff.

Thanks for the sites. I will look into them, and probably be ordering my CRD on sunday at the dealership.

:D

-BEANS-


Basically, windshield washer fluid contains methanol - you're injecting part water and part methanol - cheap way of getting alcohol injection. Water cools the intake air and lowers exhaust temps, the methanol is giving the engine extra fuel and that extra 100 hp. But you'd better stick to the cheap fluid that is nothing but water and methanol, no way of telling what extra chemicals some brand such as RainX might have included and what it would do to your engine or cat.

I have seen some discussion over the years on using straight water. According to some, on older cars where you can adjust the fuel/air mixture and no 02 sensors to foul things up, using water injection allowed you to lean out the mixture for better fuel economy, past the point that would normally be feasible, and the water flashing off kept the cylinder temps down such that you didn't burn up your valves.

_________________
Mitchell Oates
'87 MB 300D Diamond Blue Metallic
'87 MB 300D - R.I.P. 12/08
'05 Sport CRD Stone White
Provent CCV Filter/AT2525 Muffler
Stanadyne 30 u/Cat 2 u Fuel Filters
Fumoto Drain/Fleetguard LF3487 Oil filter
V6 Airbox/Amsoil EAA Air Filter
Suncoast TC/Shift Kit/Aux Cooler
Kennedy Lift Pump/Return Fuel Cooler


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 08, 2006 8:03 am 
Offline
LOST Addict
User avatar

Joined: Tue Oct 18, 2005 10:12 pm
Posts: 3255
Location: SwampEast MO
Water injection was/is common on diesels and even was used on one or two GM gas cars in 60's & 70's, the one I remember is the Olds Cutlas. I have a friend with it on his '96 PowerSmoke and says he is going to do it to his TDI Passat. He uses the injection system with just plain water for cooling EGT's when towing, he says he has added ethanol in winter to prevent freezing and increase power lost from winter fuel. He is retired diesel tech from Deer, and does like turning a wrench.

_________________
91 MB 300D 2.5L Turbo. Her's

05 MB E320 CDI. Mine


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 08, 2006 8:57 am 
Offline
LOST Member

Joined: Thu Sep 15, 2005 8:49 am
Posts: 132
Add me to the "VERY INTERESTED" club for the 3" exhaust (including the cat).

Dean

_________________
2005 Jeep Liberty CRD, Provent CCR, 2.5" lift


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 08, 2006 9:02 am 
Offline
LOST Addict
User avatar

Joined: Tue Oct 18, 2005 10:12 pm
Posts: 3255
Location: SwampEast MO
Are we still talking $900 range for cat-back?

_________________
91 MB 300D 2.5L Turbo. Her's

05 MB E320 CDI. Mine


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 08, 2006 12:18 pm 
Offline
LOST Newbie

Joined: Mon Feb 06, 2006 10:29 pm
Posts: 10
Location: Tualatin, OR
Definitely less than $900 for the cat back!

_________________
Thank you, John
John Bendit
Diesel Power USA
dieselpowermodule.com
A division of Upscale Automotive, Inc.
19460 SW 89th Ave.
Tualatin, OR 97062
503-692-0846


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 08, 2006 12:18 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Feb 17, 2006 8:39 pm
Posts: 257
Location: Powder Springs, GA
oldnavy wrote:
Are we still talking $900 range for cat-back?


And Guys were bitching when I said 3"-3.5" from the turbo flage back including the hi flow CAT and all stainless. Sheesh!!

_________________
Barr
06 JLL CRD 04/06/06 23K+ mi., Amsoil, Racor Fuel Filter, EHM, ORM, 3" SS exh from Turbo back, Fumoto, 245/70/16 Grabber AT2
Waiting for installation: TransGo 45RFE-HD2, S&B Air Filter, ProVent
06 Jetta TDI/DSG, RC1+, VAG-COM,
V-65 Drag Bike


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 08, 2006 12:28 pm 
Offline
LOST Addict
User avatar

Joined: Tue Oct 18, 2005 10:12 pm
Posts: 3255
Location: SwampEast MO
marauderer wrote:
oldnavy wrote:
Are we still talking $900 range for cat-back?


And Guys were bitching when I said 3"-3.5" from the turbo flage back including the hi flow CAT and all stainless. Sheesh!!
I didn't witch, I just said it wasn't worth the money to do a 3" or 3.5" if you were just using it like a soccer mom type vehicle. I think there is a lot of the CRD's that fall into that catagory, my wife's CRD does. The only off road experience her CRD has had is to drive it into back yard to make room for guest to park. I know, I know what a waste, but sometimes it's hard to reason with a 55 year old woman. :shock: :lol:

That's not to say I might not spend some money for stuff on the rig that would never be needed or in some cases never used.

_________________
91 MB 300D 2.5L Turbo. Her's

05 MB E320 CDI. Mine


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 08, 2006 1:10 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Feb 17, 2006 8:39 pm
Posts: 257
Location: Powder Springs, GA
oldnavy wrote:
marauderer wrote:
oldnavy wrote:
Are we still talking $900 range for cat-back?


And Guys were bitching when I said 3"-3.5" from the turbo flage back including the hi flow CAT and all stainless. Sheesh!!
I didn't pain, I just said it wasn't worth the money to do a 3" or 3.5" if you were just using it like a soccer mom type vehicle. I think there is a lot of the CRD's that fall into that catagory, my wife's CRD does. The only off road experience her CRD has had is to drive it into back yard to make room for guest to park. I know, I know what a waste, but sometimes it's hard to reason with a 55 year old woman. :shock: :lol:

That's not to say I might not spend some money for stuff on the rig that would never be needed or in some cases never used.


Yeah, Yeah, Yeah! :lol: No, really I understand. Just getting a small dig in for a little levity and decension. :lol:

_________________
Barr
06 JLL CRD 04/06/06 23K+ mi., Amsoil, Racor Fuel Filter, EHM, ORM, 3" SS exh from Turbo back, Fumoto, 245/70/16 Grabber AT2
Waiting for installation: TransGo 45RFE-HD2, S&B Air Filter, ProVent
06 Jetta TDI/DSG, RC1+, VAG-COM,
V-65 Drag Bike


Top
 Profile  
 
 Post subject:
PostPosted: Tue May 09, 2006 12:23 am 
Offline
LOST Addict

Joined: Fri Sep 16, 2005 2:01 am
Posts: 1944
Location: Mooresville, NC
I could really give a hoot about performance mods, I'm more of a fuel economy and efficiency freak. Go figure, I also own a road-going battery-only electric pickup (and no, I was never qualified as battery charging electrician, but I was qualified diesel operator).

I'm only interested in performance mods if you can show me they do one or both of the following -

1 - over the long run, make the engine/drivetrain/vehicle last longer or reduce maintenance requirements.

2 - squeeze a few more miles out of a tank of fuel.

Hmmm, just had an idea. I have a Westach motor temp gauge on my electric, 100 to 400 F if I remember correctly, with thermistor sensor on a 6 ft lead. Can you say impromptu air intake temp gauge?

_________________
Mitchell Oates
'87 MB 300D Diamond Blue Metallic
'87 MB 300D - R.I.P. 12/08
'05 Sport CRD Stone White
Provent CCV Filter/AT2525 Muffler
Stanadyne 30 u/Cat 2 u Fuel Filters
Fumoto Drain/Fleetguard LF3487 Oil filter
V6 Airbox/Amsoil EAA Air Filter
Suncoast TC/Shift Kit/Aux Cooler
Kennedy Lift Pump/Return Fuel Cooler


Top
 Profile  
 
 Post subject:
PostPosted: Tue May 09, 2006 7:29 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Feb 17, 2006 8:39 pm
Posts: 257
Location: Powder Springs, GA
Does that mean you were an MM Nuc or Aux man?? Some performance mods do increase milage but most that do performance mods like the performance and push the pedal harder so milage goes down. :D

RetMil46, you shouldn't do performance mods! :cry: Or go over 720 RPMs.

_________________
Barr
06 JLL CRD 04/06/06 23K+ mi., Amsoil, Racor Fuel Filter, EHM, ORM, 3" SS exh from Turbo back, Fumoto, 245/70/16 Grabber AT2
Waiting for installation: TransGo 45RFE-HD2, S&B Air Filter, ProVent
06 Jetta TDI/DSG, RC1+, VAG-COM,
V-65 Drag Bike


Top
 Profile  
 
 Post subject:
PostPosted: Tue May 09, 2006 8:45 am 
Offline
LOST Addict
User avatar

Joined: Tue Oct 18, 2005 10:12 pm
Posts: 3255
Location: SwampEast MO
If you two don't come up for fresh air in those pig boats, I'm going to pull your parascope liberty. :lol: Aah the beaches of Southern France. :wink:

_________________
91 MB 300D 2.5L Turbo. Her's

05 MB E320 CDI. Mine


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 28 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com