| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Tensioner pulley part number http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=82912 |
Page 1 of 1 |
| Author: | Landerson1515 [ Tue Aug 25, 2015 2:53 am ] |
| Post subject: | Tensioner pulley part number |
Can anyone tell me the part number for the tensioner pulley assembly I am having a hard time finding one. Thanks |
|
| Author: | papaindigo [ Tue Aug 25, 2015 7:33 am ] |
| Post subject: | Re: Tensioner pulley part number |
Depends on which one see http://www.idparts.com/serpentine-belt- ... -2826.html or http://www.idparts.com/timing-belt-tens ... -2754.html |
|
| Author: | Landerson1515 [ Tue Aug 25, 2015 11:56 am ] |
| Post subject: | Re: Tensioner pulley part number |
Thank you I was looking for the serpentine tensioner |
|
| Author: | mtbdemon [ Wed Sep 09, 2015 11:03 pm ] |
| Post subject: | Re: Tensioner pulley part number |
I have a follow up question for this I actually need to replace the tensioner pulley for the serpentine belt and have found one as low as $90 while the idparts is $160 (OEM is $350) I'm guessing idparts is the way to go? also, how difficult is this to replace? I have already replaced the two static pulleys Thanks for all the help. Ken |
|
| Author: | jws84_02 [ Thu Sep 10, 2015 7:08 am ] |
| Post subject: | Re: Tensioner pulley part number |
Go with the one from idparts. The $90 one is prolly a junk crown brand and they have had too many failures. Installation is pretty straight forward. You will need to remove the power steering pulley in order to take the the tensioner off |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|