Is anybody interested in putting together a top load fuel filter kit?

I am going to install one in 20,000 miles.

I am overwhelmed with projects and a kit would save time figuring out what I need and finding everything

I already have the in tank lift pump installed.

_________________
2006 Jeep Liberty CRD 142,000 miles New engine 2-2014, Green Eco tune, FS2500 bypass filter Weeks elbow, European Torque converter, brakes front UCA's wheel bearing and front hubs. Front hitch OEM lift pump
98 K2500 Suburban 6.5td
96 K1500 " 6.5td
95 2 door Tahoe 6.5td
94 K3500 cc srw 5 speed 6.5td
91 International Model 6 speed spicer 4700

GMCTD is using a fuel filter housing from a 2000-2002 24 valve Dodge Cummins. It is a top loader and 7 micron filters are available. The Fleetguard part number is FS19856 for the 7 micron filter. The 7 micron filter is intended for use in the 2003-2007 5.9L Dodge trucks with the CP3 injector pump, but will work in the 2000-2002 filter housing. You will need an in-tank or inline fuel pump because these housings don't have priming pumps. See links below:

viewtopic.php?f=5&t=29149

http://www.genosgarage.com/product/fs19856/fuel-filters

I have seen the filter housings on eBay from $50 - $150.

_________________
2006 CRD Sport
GDE FT ECO tune, GDE TCM ECO tune, ARP studs, HDS-001 203F T-Stat, 3.7L nylon fan & Hayden 2905 clutch, Carter P76148M in-tank pump, Racor 245R122 filter head & 2 micron R25S fuel filter, Provent 200, Samcos, Fumoto F-102, Litens 920834A de-coupler, PML rear diff cover, OEM trans pan with welded in bung, JBA UCAs, full skids.