| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| need rocker arm clip http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=84827 |
Page 1 of 1 |
| Author: | mustang_gt_350 [ Wed Jun 22, 2016 7:57 am ] |
| Post subject: | need rocker arm clip |
I'm in need of 1 of the clips that hold the ball of the "lifter" to the rocker arm. Any idea on where i can locate one? I tore my head off about 1-2 months ago and just had it gone over at the shop and all is well, I'm in the process of gathering a parts list to reassemble so i can order my studs and gaskets and most likely my timing belt stuff while its apart since its due in 50k miles. I broke one of the clips pulling the old rockers, THe rockers are fine and show no noticable wear (due i think to the 5-40 oil and not the 0-40) But hate to put it together without it, and don't want to buy a whole set just for that reason. |
|
| Author: | flash7210 [ Wed Jun 22, 2016 8:55 am ] |
| Post subject: | Re: need rocker arm clip |
Try IDparts or eBay. You might be able to purchase a single rocker. You can also try contacting Mountainman or Geordi. They might have some spare parts left over. |
|
| Author: | mustang_gt_350 [ Wed Jun 22, 2016 11:28 am ] |
| Post subject: | Re: need rocker arm clip |
Thanks. I will try to contact them and IDparts, as thats where i am ordering some stuff from |
|
| Author: | jws84_02 [ Wed Jun 22, 2016 12:46 pm ] |
| Post subject: | Re: need rocker arm clip |
I have many good used complete rockers. Pm me. I'll ship just one to you |
|
| Author: | Sir Sam [ Wed Jun 22, 2016 5:03 pm ] |
| Post subject: | Re: need rocker arm clip |
I have a good number around from trashed rockers if no one else comes through, I can get some going your way friday or saturday if you need it. |
|
| Author: | mustang_gt_350 [ Wed Jun 22, 2016 10:29 pm ] |
| Post subject: | Re: need rocker arm clip |
jws84_02 Helped me out everyone. Thanks for the reply's and the help. |
|
| Author: | geordi [ Wed Jun 22, 2016 10:54 pm ] |
| Post subject: | Re: need rocker arm clip |
Yep, I got your PM, and I have a couple boxes of them too. I believe that the new rockers are an upgraded design, so I'm not really in the mindset of re-using old rockers, so these are just laying around and I haven't gotten rid of them yet. I'm about to head out on another CRD trip though so you may get faster service from one of the guys above. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|