You can do it yourself, but is best done by a machine shop that has all the proper tools to remove old valves, grind seats and lap new valves into seats for proper sealing...VERY IMPORTANT!!!!
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Exhaust Valves http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=85028 |
Page 1 of 1 |
| Author: | Jsamps1345 [ Thu Jul 28, 2016 2:17 pm ] |
| Post subject: | Exhaust Valves |
Since i am in the process of rebuilding my engine i figure i should replace the exhaust valves while its all apart. Is this something i can do myself or do i need to take it to a shop to do? Also is it worth replacing the intake valves also? |
|
| Author: | WWDiesel [ Thu Jul 28, 2016 2:22 pm ] |
| Post subject: | Re: Exhaust Valves |
You can do it yourself, but is best done by a machine shop that has all the proper tools to remove old valves, grind seats and lap new valves into seats for proper sealing...VERY IMPORTANT!!!!
|
|
| Author: | Jsamps1345 [ Thu Jul 28, 2016 2:28 pm ] |
| Post subject: | Re: Exhaust Valves |
Thats what i was looking for, Thanks! It seemed easy enough to physically replace them but i wasn't sure if there was more to it. Looks like i will be bringing it to the shop when i bring my crank. Thanks Again |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|