ok, I did some research in here and found good info on the SEGR mod, but no where on how to make it/buy it. I see someone was making and selling this, but the post was from 2007. Any leads or ideas on how to make one or buy one?

_________________
I can do a job quick, good, or cheap, pick ONE.


2005 Jeep Liberty CRD

No one's been building them is ages although I suspect someone has the schematics. As I recall all it does is turn of the EGR without triggering a CEL. While it costs a lot more a GDE tune will do the same thing and much more. If you don't want to spend the $ for a GDE tune, I suggest you should, but do want to turn off the EGR with no CEL there are plenty of DIY tunes that will turn off the EGR for the cost of a PC connection cable, ca. $20

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs

The egr delete kits and diy tunes have eliminated the need for the segr.

I still have my segr kit installed.
Mainly because Im too lazy to figure out how to unwire it from the system.

_________________
U.S. Army Retired

I've got one floating around, I think it needs to be built and then wired in, but yeah, the DIY tunes or the GDE tune is a much better option in concert with the elbow kit or some other form of blocking plate.


Sent from my iPhone using Tapatalk

_________________
Proud supporting vendor of LOST Jeeps
TRAVELING CRD TECH. I come to you!
Need help? Just ask! I've taken it apart more than most.
Email jeep [at] maincomputer [dot] com - BOARD MESSAGING IS BROKEN
Over 225 CRDs currently driving with my valves, timing belt, rockers, or ARP Studs.
Bad noises = REALLY bad things.