Good day,

I am from South Africa and own a 2005 KJ CRD 2.8 with 6 speed manual gear box. I plan to block off the EGR and then use one of the EGR/FCV DIY ECU flashes on this forum. I assume all the 2.8 CRD's referred to in the previous posts are automatic. Can I do this reflash safely on my manual KJ and if so which one would be relevant?

_________________
Ludi Neethling
South Africa
2005 Jeep KJ CRD 2.8 (6 M/T)
Susp:Ironman Coils, Shocks new bushes and ball joints
Therm: Replaced
EGR: Cleaned, re-installed
CCV Catch Can
MAP sensor: Cleaned
Injectors: Repl
Alt pulley: Repl
Serp Belt: Repl
Crank Pos Sens: Replaced
T/B & W/P: Repl @ 200k Km
Repl Cer GP with Etechno 7V GP 212k Km
Repl CCV

Great question! I'm sure it's being done with the manual box but the definitive answer would come from YETI or SQUEETO over in the DIY flash section of the tech forum: viewtopic.php?f=98&t=78418

I strongly advise reading at least the first few pages of the thread before attempting the flash.

BTW, Once you flash, you'll never go back.

_________________
2005 Sport CRD 130k
Yeti's Stage II DIY Hot Tune
Weeks stage 1&2 EGR Delete
Florida HD billet TC [500+flbs torque]
DIY T'stat Mod {Kap's design}
'03 Ram TCM