LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Fan Bracket
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=85949		 Page 1 of 1
Author:  JHolm [ Mon Jan 09, 2017 2:07 pm ]
Post subject:  Fan Bracket
Has anyone changed the bearings in the fan bracket? Is it possible? I was thinking of attempting it and if it didn't work out just buy the new one.

Mine is was rough last time I checked it and a new one from the dealer is $350 cnd. From Id parts with shipping and exchange is probably at least $300.

If the pully is press fit I'm assuming you need a bit of heat to remove it. After that I'm not sure.





Sent from my SM-G920W8 using Tapatalk
Author:  WWDiesel [ Mon Jan 09, 2017 2:52 pm ]
Post subject:  Re: Fan Bracket
There is a Mopar one on eBay for 170 + shipping...
http://www.ebay.com/itm/Genuine-Bracket ... YP&vxp=mtr
another one for 157 at:
http://www.drivefordparts.com/dodge-514 ... n-bracket/

If you can come up with just the bearing number, please share... :wink:
Author:  blk05liberty [ Wed Jan 11, 2017 1:41 pm ]
Post subject:  Re: Fan Bracket
id parts.com fan pulley and bracket is 200.00 I believe, no exchange needed. I'm sure the bearing is replaceable, if you have a good hydraulic press and a torch. goodluck!
Author:  Sir Sam [ Wed Jan 11, 2017 2:20 pm ]
Post subject:  Re: Fan Bracket
blk05liberty wrote:
id parts.com fan pulley and bracket is 200.00 I believe, no exchange needed. I'm sure the bearing is replaceable, if you have a good hydraulic press and a torch. goodluck!


I think he meant currency exchange and import fees.
Author:  JHolm [ Wed Jan 18, 2017 2:47 pm ]
Post subject:  Re: Fan Bracket
Sir Sam wrote:
blk05liberty wrote:
id parts.com fan pulley and bracket is 200.00 I believe, no exchange needed. I'm sure the bearing is replaceable, if you have a good hydraulic press and a torch. goodluck!


I think he meant currency exchange and import fees.

Ya that's what I ment. Lol. Anyway I'll just buy a new one and then experiment with the old one.

Sent from my SM-G920W8 using Tapatalk
Author:  Sir Sam [ Sat Jan 21, 2017 4:33 pm ]
Post subject:  Re: Fan Bracket
JHolm wrote:
Sir Sam wrote:
blk05liberty wrote:
id parts.com fan pulley and bracket is 200.00 I believe, no exchange needed. I'm sure the bearing is replaceable, if you have a good hydraulic press and a torch. goodluck!


I think he meant currency exchange and import fees.

Ya that's what I ment. Lol. Anyway I'll just buy a new one and then experiment with the old one.

Sent from my SM-G920W8 using Tapatalk


Make sure to get it shipped usps so you can avoid import fees. No import fees on mail(hence usps).
Author:  npkdm [ Sat Jul 22, 2017 9:54 am ]
Post subject:  Re: Fan Bracket
My fan bracket bearing went out Thursday and I'm waiting on 2nd day air shipping to bring me a new one. I am stranded at home and I'm unsure if I have all the tools required to change it. Can someone give a list of the tools needed so I can have someone bring them to me?
Author:  joe_ [ Sat Jul 22, 2017 2:31 pm ]
Post subject:  Re: Fan Bracket
13mm socket and ratchet
possibly a 15mm socket, can't remember
large adjustable wrench; I think I bought either a 15" or 18" and it worked well
Author:  GordnadoCRD [ Sat Jul 22, 2017 6:10 pm ]
Post subject:  Re: Fan Bracket
I don't remember what size for sure is the one that releases and resets the serpentine belt tensioner, but you'll probably want a box end for that. 15mm?
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/