Here's the picture of the metal clips. Where do those go?
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Urgent help needed: CRD updated Fuel Filter Head Wiring kit http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=85987 |
Page 1 of 1 |
| Author: | m0sfet [ Sat Jan 14, 2017 3:19 pm ] |
| Post subject: | Urgent help needed: CRD updated Fuel Filter Head Wiring kit |
So I am putting the new wiring kit together to form the new plug. I see that there are some metal clips that came with the kit. I am not sure where those metal clips go. I was able to put the new plug together without those metal clips. Did I do something wrong? |
|
| Author: | m0sfet [ Sat Jan 14, 2017 3:31 pm ] |
| Post subject: | Re: Urgent help needed: CRD updated Fuel Filter Head Wiring |
Here's the picture of the metal clips. Where do those go?
|
|
| Author: | papaindigo [ Sat Jan 14, 2017 3:45 pm ] |
| Post subject: | Re: Urgent help needed: CRD updated Fuel Filter Head Wiring |
They don't "go" anywhere. If you want, I don't recommend it, they can be used as clamps when you splice the old and new wires together. Better to use rosin core solder with quality electricians tape or marine grade butt connectors with heat shrink tubing; I used the latter. |
|
| Author: | m0sfet [ Sat Jan 14, 2017 5:29 pm ] |
| Post subject: | Re: Urgent help needed: CRD updated Fuel Filter Head Wiring |
Ahh ok. Thanks for your help. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|