| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Transfer case lever http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=86066 |
Page 1 of 1 |
| Author: | HER_CRD [ Tue Jan 31, 2017 9:45 pm ] |
| Post subject: | Transfer case lever |
So our Liberty CRD has the floppy transfer case lever condition. I was just out there looking at it and see the cable is still connected at the transfer case. Thinking broken cable. How big of a job to change? Can the other end of the cable become disconnected? Sent from my HTC6525LVW using Tapatalk |
|
| Author: | HER_CRD [ Tue Jan 31, 2017 10:46 pm ] |
| Post subject: | Re: Transfer case lever |
I think I answered one question. The lever end of the cable looks to have a cast housing that the lever attaches. I'm guessing something with the internal workings failed. Sent from my HTC6525LVW using Tapatalk |
|
| Author: | papaindigo [ Wed Feb 01, 2017 8:14 am ] |
| Post subject: | Re: Transfer case lever |
The 4-wheel drive shift cable is held to the lever at the transfer case by a plastic "cap" that is easy to break. In addition the cable outer lining is retained in another plastic (IIRC) clip. If the "cap" breaks the cable can become detached from the lever. If the lining retaining clip breaks there is nothing to keep the lining in place while the cable pulls on the lever. In both cases the lever will just flop. For PNs for both clips see viewtopic.php?f=98&t=69582&p=743873#p743873 Might not solve your problem but worth a look |
|
| Author: | WWDiesel [ Wed Feb 01, 2017 12:24 pm ] |
| Post subject: | Re: Transfer case lever |
HER_CRD wrote: I think I answered one question. The lever end of the cable looks to have a cast housing that the lever attaches. I'm guessing something with the internal workings failed. Hopefully this will help? These are all the part numbers for the shift cable and associated clips and parts:
transfer case Shift Cable bracket 68044396AA transfer case shift cable 52060462AG transfer case cable retaining clip to case 68018106AA transfer case cable end retaining plastic bushing 68064273AB |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|