| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| code 74 sys ctr 1 mode timeout http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=89009 |
Page 1 of 1 |
| Author: | kk3dln [ Sun Jul 08, 2018 1:36 pm ] |
| Post subject: | code 74 sys ctr 1 mode timeout |
The esp, abs and skid lites come on. What is the fix? Don |
|
| Author: | mass-hole [ Sun Jul 08, 2018 2:16 pm ] |
| Post subject: | Re: code 74 sys ctr 1 mode timeout |
kk3dln wrote: The esp, abs and skid lites come on. What is the fix? Just out of curiosity, do you have anything plugged into the obd port? That can throw the computers for a loop sometimes, although I’ve never heard this one. |
|
| Author: | papaindigo [ Sun Jul 08, 2018 2:17 pm ] |
| Post subject: | Re: code 74 sys ctr 1 mode timeout |
I'm not sure what the title of your post is supposed to mean? What year model is your CRD? A common cause for similar malfunctions is one or more defective wheel speed sensors. On the 05 model it's often a broken wire inside the insulation for the single rear speed sensor on the differential housing (06 models have sensors on all 4 wheels). Ditto on mass-hole's post. |
|
| Author: | kk3dln [ Sun Jul 08, 2018 10:03 pm ] |
| Post subject: | Re: code 74 sys ctr 1 mode timeout |
The only thing that was plugged into the port was the scan tool, a innova 3160. It is a 2006 crd . jeep, with sensors on each wheel. The heading is the code that came up on the scanner. |
|
| Author: | rickcj7 [ Wed Jul 11, 2018 10:08 pm ] |
| Post subject: | Re: code 74 sys ctr 1 mode timeout |
The scanner shows (Cxxxx - code 74 sys ctr 1 mode timeout) in abs. It doesn't give the C code only the description. Does any one know what this is? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|