I am in the process of trying to find a replacement bearing for the fan hub so I can rebuild them. No luck yet, but still working on it and have not given up yet.
Anyone got a bad one they want to get rid of, let me know.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Looking for an Bracket with Bearing (5142661AB) http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=90349 |
Page 1 of 1 |
| Author: | osoba [ Mon Aug 19, 2019 6:32 pm ] |
| Post subject: | Looking for an Bracket with Bearing (5142661AB) |
In midst of head gasket, cylinder head rebuild. Can anyone provide me with a supplier for difficult to find part, Fan Bracket with Bearing 2005 Liberty CRD 2.8 OEM Part Number: 5142661AB Manufacturer Number: 5142661AA reference: https://www.idparts.com/liberty-crd-fan ... -4237.html Much appreciated |
|
| Author: | TKB4 [ Mon Aug 19, 2019 7:55 pm ] |
| Post subject: | Re: Looking for an Bracket with Bearing (5142661AB) |
There have been some posts on here recently about that bracket that state it is a discontinued part and I think a couple online places canceled orders for it. I may have one on my salvage jeep if your are interested PM me. |
|
| Author: | flash7210 [ Mon Aug 19, 2019 10:15 pm ] |
| Post subject: | Re: Looking for an Bracket with Bearing (5142661AB) |
I started a discussion about this a month or two ago. If you can’t find a used one, you’re screwed. At the moment the only other option is to go with all electric cooling fans. |
|
| Author: | WWDiesel [ Mon Aug 19, 2019 10:53 pm ] |
| Post subject: | Re: Looking for an Bracket with Bearing (5142661AB) |
I am in the process of trying to find a replacement bearing for the fan hub so I can rebuild them. No luck yet, but still working on it and have not given up yet. Anyone got a bad one they want to get rid of, let me know. |
|
| Author: | TKB4 [ Sun Aug 25, 2019 2:19 pm ] |
| Post subject: | Re: Looking for an Bracket with Bearing (5142661AB) |
Even the similar ones on eBay for other years are about $360 wow. I have one I can sell if anyone interested pm me. |
|
| Author: | Diesel Dan [ Sun Aug 25, 2019 9:37 pm ] |
| Post subject: | Re: Looking for an Bracket with Bearing (5142661AB) |
Was probably covered already but what do the euro models use? Can they be adapted? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|