| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Turbo Charger Oil Feed Line Adapter? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=90357 |
Page 1 of 1 |
| Author: | JeepLovR [ Wed Aug 21, 2019 3:44 pm ] |
| Post subject: | Turbo Charger Oil Feed Line Adapter? |
Hey!  I'm getting ready to install a new turbocharger and removed the Turbo Charger Oil Feed Line (5142607AA) to replace it but there appears to be an adapter on the end that screws into the engine and it is well and truly stuck on the feed line. Does anyone know the part number? I can't seem to find it on any diagrams. Thanks, Nick 
|
|
| Author: | WWDiesel [ Wed Aug 21, 2019 11:17 pm ] |
| Post subject: | Re: Turbo Charger Oil Feed Line Adapter? |
JeepLovR wrote: Hey! I'm getting ready to install a new turbocharger and removed the Turbo Charger Oil Feed Line (5142607AA) to replace it but there appears to be an adapter on the end that screws into the engine and it is well and truly stuck on the feed line. Does anyone know the part number? I can't seem to find it on any diagrams. Thanks, Nick IDParts.com:> https://www.idparts.com/turbo-oil-feed- ... -5673.html & https://www.idparts.com/turbocharger-oi ... -3209.html OEM Part Number: 5142792AA Manufacturer Number: 5142792AA Turbo Oil Feed Line Banjo Bolt for the Liberty CRD 
|
|
| Author: | Billua [ Thu Aug 22, 2019 12:27 am ] |
| Post subject: | Re: Turbo Charger Oil Feed Line Adapter? |
I think the op is talking about the rubber grommet on the return into the block. |
|
| Author: | WWDiesel [ Thu Aug 22, 2019 1:33 am ] |
| Post subject: | Re: Turbo Charger Oil Feed Line Adapter? |
Billua wrote: I think the op is talking about the rubber grommet on the return into the block. JeepLovR wrote: Hey! I'm getting ready to install a new turbocharger and removed the Turbo Charger Oil Feed Line (5142607AA) to replace it but there appears to be an adapter on the end that screws into the engine and it is well and truly stuck on the feed line. Does anyone know the part number? I can't seem to find it on any diagrams. Thanks, Nick The part number the OP listed, 5142607AA is for the OIL FEED LINE, NOT the rubber grommet. But if you want the rubber grommet: Turbocharger Oil Return Line Bottom Grommet (Liberty CRD) Part No. 5142794AA https://www.idparts.com/turbocharger-oi ... dgda0br462 
|
|
| Author: | RDBUL [ Thu Aug 22, 2019 11:38 am ] |
| Post subject: | Re: Turbo Charger Oil Feed Line Adapter? |
JeepLovR, The part number your looking for is 5066814AA. This is the fitting that screws into the block that the turbo oil feed line threads onto. I had the same issue on my engine rebuild! It was readily available from my Jeep dealer. 
|
|
| Author: | WWDiesel [ Thu Aug 22, 2019 1:22 pm ] |
| Post subject: | Re: Turbo Charger Oil Feed Line Adapter? |
RDBUL wrote: JeepLovR, The part number your looking for is 5066814AA. This is the fitting that screws into the block that the turbo oil feed line threads onto. I had the same issue on my engine rebuild! It was readily available from my Jeep dealer. Many of the Mopar online dealers list that part number as being available for less than 10 bucks if you can't find it locally. 
|
|
| Author: | JeepLovR [ Thu Aug 22, 2019 2:38 pm ] |
| Post subject: | Re: Turbo Charger Oil Feed Line Adapter? |
Perfect! Yes RDBUL that's what I'm looking for! Thanks for your help guys
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|