| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| rear lift http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=90950 |
Page 1 of 1 |
| Author: | craneman [ Fri Feb 07, 2020 4:43 pm ] |
| Post subject: | rear lift |
need a few opinions. im sure someone will have one. LOL need to lift my CRD. was lucky to score a complete front end package from Jeepin Al. so I can go as high as 4" with his coil overs. which leads me to what do I do to the back end???? I want to stay around 3" of lift. what are my options?????? |
|
| Author: | TKB4 [ Fri Feb 07, 2020 8:52 pm ] |
| Post subject: | Re: rear lift |
I am sure you will get answers but most don't go quite that high with the CRD. Tom Mudd knows a lot about the suspensions but he doesn't post much on the CRD section you might try gasser section too or PM him. |
|
| Author: | mass-hole [ Sat Feb 08, 2020 12:45 am ] |
| Post subject: | rear lift |
I had OME 2790 springs, JBA top plate, and clevis spacer, and I would bounce my UCA’s off the springs no problem just pulling into the grocery store parking lot. That was with JBA’s UCA’s too. 4” lift probably would not work all that well. Jba had 2.5” rear springs which you could pair with an extra ISO to get 3”. I have a set for sale at the moment in the for sale section on this site. |
|
| Author: | craneman [ Mon Feb 10, 2020 8:57 am ] |
| Post subject: | Re: rear lift |
sent you a PM. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|