When I got my jeep the front drive shaft was blown in half, I pulled it out and of course lost the bolts. I bought a new one (factory is discontinued and I had issues with the local part store one) and it did not come with bolts or the "washers". Looking around online it looks like I need 05015996AA and 05015109AA, but thats going to be along the lines of $85 from any site I could find. Anyone know of a cheaper place to get them/ if I can just use some hardware store bolts without the washers?

_________________
06' Silver Limited CRD

Secondary fuel filter from wwdiesel
Northstar AGM
GDE Hot Tune
EGR delete
Suncoast TC
Transgo Kit
Carter Intank-pump
SAMCO Hoses
Silicone Intake hose
Silicone Vacuum hoses
Hayden HD Fan Clutch
ARB Front Bumper
Bosch 5V glow plugs
Gen II Fuel Head
Rockfather II Lift
GM 11 Blade fan

They should be the same as the bolts from the gas Liberties, so if you don't mind used any junkyard should have them. Whether you can get them to pull just the bolts I don't know. If you have a pull-a-part type place you should be able to get them yourself for next to nothing.

_________________
2005 Jeep Liberty Sport CRD 4x4 278k

If you know the length of the bolts, just order some metric allen bolts of the correct length. I believe the thread is 8mm X 1.25.
Install using some medium strength blue loctite along with some lock washers or star type lock washers and you will be just fine.

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve