| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Alt Decoupler Litens 920834A Doesnt Seem To Fit - SOLVED http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=91071 |
Page 1 of 1 |
| Author: | k9adv [ Wed Mar 11, 2020 8:51 pm ] |
| Post subject: | Alt Decoupler Litens 920834A Doesnt Seem To Fit - SOLVED |
I got this PN from here a while back and got one from Advance Auto. It doesnt seem to thread on. Anyone else have an issue with this part ? This is supposed to be the upgraded, greased decoupler. Thanks |
|
| Author: | WWDiesel [ Wed Mar 11, 2020 10:34 pm ] |
| Post subject: | Re: Alt Decoupler Litens 820834A Doesnt Seem To Fit |
k9adv wrote: I got this PN from here a while back and got one from Advance Auto. It doesnt seem to thread on. Anyone else have an issue with this part ? This is supposed to be the upgraded, greased decoupler. Thanks Have these PN's on file: Litens 920720 or 920834A Looks like you got the wrong PN? 
|
|
| Author: | Jay ne Ohio [ Thu Mar 12, 2020 8:38 am ] |
| Post subject: | Re: Alt Decoupler Litens 820834A Doesnt Seem To Fit |
k9adv wrote: I got this PN from here a while back and got one from Advance Auto. It doesnt seem to thread on. Anyone else have an issue with this part ? This is supposed to be the upgraded, greased decoupler. Thanks As stated by WW, you need 920834A. Or you can get a Gates 37015P on Amazon for $46. I did have trouble on my last one. The metal spacer did not come off the alternator shaft with the old pulley. The new pulley would not thread on with the spacer still attached. I had to use a screwdriver to carefully pry the spacer off the shaft. I also had to clean up the threads on the shaft with a metric die. I used an impact to spin the old pulley off and it buggered the threads slightly. |
|
| Author: | k9adv [ Thu Mar 12, 2020 8:52 am ] |
| Post subject: | Re: Alt Decoupler Litens 820834A Doesnt Seem To Fit |
I typo'ed in the title of the post (now edited). i got the 920834A and it doesnt fit. |
|
| Author: | APC9199 [ Thu Mar 12, 2020 9:03 am ] |
| Post subject: | Re: Alt Decoupler Litens 920834A Doesnt Seem To Fit |
Isn't that a left hand thread? |
|
| Author: | k9adv [ Thu Mar 12, 2020 9:28 am ] |
| Post subject: | Re: Alt Decoupler Litens 820834A Doesnt Seem To Fit |
Jay ne Ohio wrote: k9adv wrote: I got this PN from here a while back and got one from Advance Auto. It doesnt seem to thread on. Anyone else have an issue with this part ? This is supposed to be the upgraded, greased decoupler. Thanks As stated by WW, you need 920834A. Or you can get a Gates 37015P on Amazon for $46. I did have trouble on my last one. The metal spacer did not come off the alternator shaft with the old pulley. The new pulley would not thread on with the spacer still attached. I had to use a screwdriver to carefully pry the spacer off the shaft. I also had to clean up the threads on the shaft with a metric die. I used an impact to spin the old pulley off and it buggered the threads slightly. That was it.....spacer did not come off with old decoupler. Pried that off and the 920834A went right on, The spacer that was on the alternator shaft is not readily apparent and appears like it belongs there. Thanks ! |
|
| Author: | TKB4 [ Thu Mar 12, 2020 11:44 am ] |
| Post subject: | Re: Alt Decoupler Litens 920834A Doesnt Seem To Fit - SOLVED |
I read thread and answers and went  because the part number was the correct one but later saw it must have been edited to show the correct one. But great solution offered this is obviously where experience with that actual problem makes all the difference. Good work!!!
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|