Hi, I installed a blue ox base plate and later got a great deal on an arb bumper, it looks like they are incompatible, however I believe I've seen a photo of an arb bumper with blue ox mount showing through, is it possible?

I dont know but I would be surprised if they are compatible with the ARB without modification. There are several members with ARB bumpers here off hand Mass Hole has an ARB bumper so you might pm to see what he might know . If you dont get an answer soon.

The other possibility would be to post on the gasser section also since I think they may have more experience by sheer numbers. Tom Mudd may have some insight. Anything is likely possible with enough fabrication . Likely welding some attachments on the ARB could serve a similar purpose for a tow bar.

_________________
05 Blu LIM, OME GDE Tbo, wk II 245/75/17, KC Lights, bull bar, 195K H TC
05 Blu Lim, Dayton, GDE HT, 255/75/18 , 210K , H TC
06 Bla Lim, GDE Eco, Destination AT 245/75/17, 151K, H TC
06 D Khaki Lim 126K wkII Eur TC
05 D khaki Lim 145k refurbishing
All CRDS: Fumoto, Lift , Fan Shroud mod, fuel head Gen II, SAMCOS,self TB, 2 Mic filt, Hayden

I did have an ARB, although I parted my Jeep so I don't have a way to look.

What do you mean by a Blue OX baseplate?

_________________
2006 CRD - GTB2056 turbo by Dieselguy86, Eco Trans Tune, Lift Pump, Week's, HDS Tstat, Racor Filter, ARP's, OME 790's+Top Plate, JBA 2.5", JBA UCA, Moab's+265/75R16, ARB Bull Bar, 4.10's, TrueTracs

OK, now I see what you mean. No I don't think you could have both mounted. The ARB uses the same "frame rails" to mount the mounting plate. I believe the ARB tow hooks hang down from that plate and they would interfere with the Blue Ox.

_________________
2006 CRD - GTB2056 turbo by Dieselguy86, Eco Trans Tune, Lift Pump, Week's, HDS Tstat, Racor Filter, ARP's, OME 790's+Top Plate, JBA 2.5", JBA UCA, Moab's+265/75R16, ARB Bull Bar, 4.10's, TrueTracs