LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Front mid shaft
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=91239		 Page 1 of 1
Author:  timothyd [ Tue Apr 21, 2020 11:50 am ]
Post subject:  Front mid shaft
I need to replace the mid shaft on the passenger side of the front axle, does anyone know if it is different than a normal dana30 like the cv axle shafts? Also if you know the part number that would be helpful.
Author:  WWDiesel [ Tue Apr 21, 2020 2:32 pm ]
Post subject:  Re: Front mid shaft
timothyd wrote:
I need to replace the mid shaft on the passenger side of the front axle, does anyone know if it is different than a normal dana30 like the cv axle shafts? Also if you know the part number that would be helpful.

IDParts has them listed,
For the complete RIGHT side drive axle with CV Joints: OEM Number: 52111780AB > https://www.idparts.com/complete-axle-r ... 10800.html
___Old PN: 5066022AA
For the complete LEFT side drive axle with CV Joints: OEM Number: 52111781AB > https://www.idparts.com/complete-axle-l ... 10799.html
___Old PN: 5066023AA

Sasquatch has them listed,
https://shop.sasquatchparts.com/product ... y-28l-crd/

NAPA Axles (reman)
Left - NMD958483 CV Driveshaft Compressed Length 23 3/4 in.
Right - NMD958484 CV Driveshaft Compressed Length 25 1/16 in.

You must: order CV axles for Liberty with a 4 cylinder engine. Not for the 3.7L V6.
The front differential assembly sets in a different position than the V6 gas engines so the left side CV axle is shorter and the right side CV axle is slightly longer.... :wink:

:google:
:SOMBRERO:
Author:  timothyd [ Tue Apr 21, 2020 5:16 pm ]
Post subject:  Re: Front mid shaft
I think its actually named "intermediate shaft", the solid shaft that is on the passenger side that goes into the housing.
Author:  WWDiesel [ Tue Apr 21, 2020 10:42 pm ]
Post subject:  Re: Front mid shaft
timothyd wrote:
I think its actually named "intermediate shaft", the solid shaft that is on the passenger side that goes into the housing.

Half shaft (intermediate shaft), right side - Part Number: 05066057AB
Several online vendors list them.

https://www.factorychryslerparts.com/pr ... 057AB.html

Image
Author:  timothyd [ Tue Jul 28, 2020 2:35 pm ]
Post subject:  Re: Front mid shaft
This is still on back order everywhere, does anyone know if you can get just the compression rings? The ring is bad on mine and the shaft is sliding in and out freely.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/