Hello All,

So have the Crank out to be turned. i attempted to remove the 3 4mm allen bolts from the Tone Ring.
Issue is that one i started with did not budge...3/8 ratchet with little cheater on the end.
Almost stripped out the bolt head. Anybody have experience removing the tone ring.
This seem like it should be a simple thing.....however....
i did not find any useful info in the 2005 service manual. (Did not look in the 2006).
Left hand threads ?? Need to heat up ? (noted the flywheel bolts had some serious lock tight on them)
Well thanks in advance for any advice.

_________________
--------------------

Brian H
Boise
2005 CRD Limited - Mods EGR eliminated, Carter intank lift pump, GM Fan w/hd clutch....looking forward to more.

Sad as it is, pain has always been the best teacher.