| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Crank Tone Ring / Reluctor wheel http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=91608 |
Page 1 of 1 |
| Author: | BWHsCRDs [ Thu Aug 06, 2020 2:19 pm ] |
| Post subject: | Crank Tone Ring / Reluctor wheel |
Hello All, So have the Crank out to be turned. i attempted to remove the 3 4mm allen bolts from the Tone Ring. Issue is that one i started with did not budge...3/8 ratchet with little cheater on the end. Almost stripped out the bolt head. Anybody have experience removing the tone ring. This seem like it should be a simple thing.....however.... i did not find any useful info in the 2005 service manual. (Did not look in the 2006). Left hand threads ?? Need to heat up ? (noted the flywheel bolts had some serious lock tight on them) Well thanks in advance for any advice. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|