| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Any trick to getting turbo drain line started http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=92068 |
Page 1 of 1 |
| Author: | bugnout [ Sat Sep 25, 2021 8:54 pm ] |
| Post subject: | Any trick to getting turbo drain line started |
Anyone know any tricks to getting the Turbo drain line bolts started? Spent an hour trying to get the bolts started. Going from underneath with a long extension, but can't get the bolts to catch a thread. |
|
| Author: | My66dodge [ Sun Sep 26, 2021 9:25 am ] |
| Post subject: | Re: Any trick to getting turbo drain line started |
That it long extension and swivel socket and make sure not to cross thread, it’s easier with the updated 06 line since it is flexible. Sent from my iPad using Tapatalk |
|
| Author: | bugnout [ Tue Oct 12, 2021 12:16 pm ] |
| Post subject: | Re: Any trick to getting turbo drain line started |
Well the trick was to get them started with a 1/4 inch socket and what amounted to 3 extensions and a driver handle rather than a ratchet. Once both were started, I switched to a 3/8 drive and 2 long extensions to tighten and torque them from under the Jeep. Not really hard, just got frustrated and had to sleep on it. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|