One of the CRDs front end was swiped by a vehicle running a re light. I have all the body damage fixed and am reassembling the headlight assembly and bumper now. Hence the problem:

There are 4 wires to what appears to be a ballast mounted near fender well. 2 black wires and 2 white wires, These wires are cut in 2 and I cannot tell which wire connects to which at the blast. My gut feeling is it doesnt matter which white wire goes to which white wire and same for the 2 black wires. I am terrible at reading wiring schematics.

Can anyone confirm that my gut feeling is either correct or its not? I can post a pic if need be but it seems pretty clear. The ballast is about 2x4 inches and 1 inch thick.

Thanks in advance for any help!

_________________
05 Blu LIM, OME GDE Tbo, wk II 245/75/17, KC Lights, bull bar, 195K H TC
05 Blu Lim, Dayton, GDE HT, 255/75/18 , 210K , H TC
06 Bla Lim, GDE Eco, Destination AT 245/75/17, 151K, H TC
06 D Khaki Lim 126K wkII Eur TC
05 D khaki Lim 145k refurbishing
All CRDS: Fumoto, Lift , Fan Shroud mod, fuel head Gen II, SAMCOS,self TB, 2 Mic filt, Hayden