| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| ? Balast wiring fromt marker assembly http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=92113 |
Page 1 of 1 |
| Author: | TKB4 [ Mon Nov 08, 2021 10:46 am ] |
| Post subject: | ? Balast wiring fromt marker assembly |
One of the CRDs front end was swiped by a vehicle running a re light. I have all the body damage fixed and am reassembling the headlight assembly and bumper now. Hence the problem: There are 4 wires to what appears to be a ballast mounted near fender well. 2 black wires and 2 white wires, These wires are cut in 2 and I cannot tell which wire connects to which at the blast. My gut feeling is it doesnt matter which white wire goes to which white wire and same for the 2 black wires. I am terrible at reading wiring schematics. Can anyone confirm that my gut feeling is either correct or its not? I can post a pic if need be but it seems pretty clear. The ballast is about 2x4 inches and 1 inch thick. Thanks in advance for any help! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|