Are there any true enthusiast left here. I posted Glow Plug Mapping and only got 2 looks..
I'm trying to learn my way around the ecu mapping of the glow plugs in the form of hex files.
If you know anything about the way it works I would like to talk to you. I have several files
that I would l like to compare the and I need to know were to look it the hex file for the glow
plug mapping and timing.. if you can help you can PM me and I will get back to you..

Thanks for your time.. Joe

_________________
Life's to short not to have fun !!!!

Contact "Yeti" on this forum, he can talk ECM mapping.
Even though some would love to help, it is way over our level of expertise....
A mistake in modifying ECM mapping can have very bad consequences.

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve

I agree. There are areas of automotive technology that really should be left to the true experts who have dedicated their time and have the equipment to develop PROPER upgrades.

Green Diesel Engineering was the best tuner and V.M. Motori ECU mapping experts until they no longer offered Liberty CRD engine upgrades, courtesy of the Environmental Protection Agency Overlords. I consider GDE to be the best solely on the detail they go to develop their tunes and the fact that Keith Cavallini was employed by V.M. Motori as an independent contractor to develop software for their engines in North America.

However, Yeti is from Italy and has an excellent reputation as an engine tuner with a loyal following.... MANY people have Yeti tunes and like them. Yeti can certainly help 2CRD's with his glow plug mapping.

The suggestion by 2CRD's that only "true enthusiasts" are those that would have glow plug mapping experience or expertise is off-putting, to say the least.