| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| PARKING BRAKE ADAPTER PLATE http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=93180 |
Page 1 of 1 |
| Author: | Sergio del Castillo [ Wed Aug 05, 2026 11:40 pm ] |
| Post subject: | PARKING BRAKE ADAPTER PLATE |
Hello every one, I am in need of a parking brake adapter plate for my 05 CRD. The part No. 52128415ACfor the left (driver) side is not longer available from Mopar. My research found several sources that list a plate that comes in three sections rather than one single plate, and they do not list the manufacturer source. cost varies from $190 to $400 for the pair (both sides). Have any one have had experience with these three pieces plates? Any comments would be sincerely appreciated, Best, Sergio |
|
| Author: | flman [ Thu Aug 06, 2026 4:44 pm ] |
| Post subject: | Re: PARKING BRAKE ADAPTER PLATE |
Sergio del Castillo wrote: Hello every one, I am in need of a parking brake adapter plate for my 05 CRD. The part No. 52128415ACfor the left (driver) side is not longer available from Mopar. My research found several sources that list a plate that comes in three sections rather than one single plate, and they do not list the manufacturer source. cost varies from $190 to $400 for the pair (both sides). Have any one have had experience with these three pieces plates? Any comments would be sincerely appreciated, Best, Sergio The stock plate is a single piece of metal, I assume the 3 piece would mean you would not have to remove the axle. Possible it attaches over the old plate? Do you have a link for the part? |
|
| Author: | Sergio del Castillo [ Thu Aug 06, 2026 8:02 pm ] |
| Post subject: | Re: PARKING BRAKE ADAPTER PLATE |
Yes , that makes sense. But to remove the old one I will need to remove the axle anyhow. The link is from Partsgeck ? They list three versions and the one from Reproparts ? is 18363-09352162. they also list one from Dorman at twise the cost. |
|
| Author: | flman [ Fri Aug 07, 2026 4:13 pm ] |
| Post subject: | Re: PARKING BRAKE ADAPTER PLATE |
Sergio del Castillo wrote: Yes , that makes sense. But to remove the old one I will need to remove the axle anyhow. The link is from Partsgeck ? They list three versions and the one from Reproparts ? is 18363-09352162. they also list one from Dorman at twise the cost. With the right tools, you can cut the old one, and not remove the axle. Here's some chinesium ones, like most are, cut out the middle man. https://www.ebay.com/itm/366395785571?f ... R4Dezd37Zw |
|
| Author: | Sergio del Castillo [ Fri Aug 07, 2026 9:19 pm ] |
| Post subject: | Re: PARKING BRAKE ADAPTER PLATE |
Thanks for the info. I will proceed with caution. Cutting out the old one wont be easy with the tools that I have available. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|