'08 KK with Borla exhaust, Lineage Ground Kit, and CAI

KY Liberty · **Joined:** Sat Jul 09, 2005 1:46 pm **Posts:** 1195

Didn't know that the Fastman throttle body was so expensive now. I don't think I would bother with the TBS. Quite a few people here have tried them and they didn't help. I would consider just doing the B&G instead. That would be right about the same price as you were looking at for the Jet and TBS. I know from hours on the dyno that the B&G works, and that the Jet Stage I with the JTEC computer doesn't. I've never dyno'd the Stage II on an NGC though, so it's possible it works. After losing 5 hp with the Jet Stage I and the horrible experience I had with their technical support, I wouldn't want to spend a couple hundred bucks to try it though.

toy4everyseason · **Posted:** Tue Apr 22, 2008 11:53 pm

so how much did the exhaust run you, if you don't mind me askin' Looking good by the way, thats a sharp KK

FL RENNY · **Joined:** Mon Nov 07, 2005 4:30 pm **Posts:** 458

toy4everyseason wrote:

so how much did the exhaust run you, if you don't mind me askin' Looking good by the way, thats a sharp KK

The exhaust was $150 installed bc I just had him swap out the muffler. But the tip cost me an extra $60 at another shop. I couldn't believe how expensive the tip was, but its double walled, chrome dipped, stainless steel. Good thing that it doesn't get hot b/c its actually touching the bumper slightly.

Diggerfreek · **Posted:** Wed Apr 23, 2008 10:25 pm

do you have a p/n for that?... send me a pm when you fill up next...because i think my 600 check from the government will go towards that....

FL RENNY · **Joined:** Mon Nov 07, 2005 4:30 pm **Posts:** 458

Diggerfreek wrote:

do you have a p/n for that?... send me a pm when you fill up next...because i think my 600 check from the government will go towards that....

I don't have a p/n but I do know that its the Borla Pro XS exhaust, with a "center /off set" muffler. Its the one below. YOU"LL LOVE IT, just leave the resonator on!!

http://www.borla.com/proxs/pages/muflroff_ctr.php

PS - it shows the muffler as "offset/center" but it will have to be installed the other way "center/offset"

Diggerfreek · **Posted:** Wed Apr 23, 2008 10:50 pm

Thanks buddy....

Diggerfreek · **Posted:** Wed Apr 23, 2008 10:58 pm

oh, do you know how large the pipe is?

FL RENNY · **Joined:** Mon Nov 07, 2005 4:30 pm **Posts:** 458

The stock exhaust pipe is 2.5 inches, if thats what you were asking?

Diggerfreek · **Posted:** Wed Apr 23, 2008 11:30 pm

perfect!!!! Thanks a Bunch

'08 KK with Borla exhaust, Lineage Ground Kit, and CAI

Who is online