Great looking Liberty! I like the lights mounted on your front bumper, and the muffler idea!

_________________
2006 Liberty Limited w/GPS & 3.7 V-6
Rusty's 2.5 coil lift w/1/2" clevis & RSX Rancho's
Rubicon Moabs w/245/75R16 MTR's
Full Skid Plates

Hey thanks! By the way, that rattle doesn't come from the upper shock bolt being tighter or looser... it rattles/clatters because the inside diameter of the mounting bolt sleeve that comes with the Rusty's lift is too large in comparison to the stock chamfered bolt's outside diameter. I torqued and torqued that dang bolt but it kept rattling. Finally I took it out and tested it to see how much play was in it. Turns out, alot for that type of application. Take some electrical tape and wrap it no more than twice. It's just enough to fill that metal to metal gap without getting squeezed out and it's alot cheaper than buying 2 more shocks. Hope this helps.

_________________
05 Black "RUBI-GADE"
MOABs w/ MTRs
Rusty's 2.5 lift
Al J's Gen4 Upper Control Arms
Custom front skid
Rusty's rear diff guard
Super Sliders by Screamin Lizard
ARB Air lockers!!
Cut my teeth in a CJ-5
"It's less the Machine and more the Operator."
http://www.cardomain.com/ride/2591493

When I switched to the RSX Rancho's, I also noticed they were 1 1/2" longer than the Rusty shocks. Which might explain the banging noise going over big bumps...topping out maybe?

_________________
2006 Liberty Limited w/GPS & 3.7 V-6
Rusty's 2.5 coil lift w/1/2" clevis & RSX Rancho's
Rubicon Moabs w/245/75R16 MTR's
Full Skid Plates