Stage 1 Complete Ready for Lift off!
A Jeep Is Reborn!!!!!!!!!!!
Pinch Weld Before Front=12" back 12.5"
Pinch Weld After Front=16.125" Back=16.125"
Before
After
Before
After
Before
After
Under
Road Flex
Adding mud this weekend
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Frankin Rene http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=6&t=10452 |
Page 1 of 1 |
| Author: | Infrared06 [ Fri Jul 14, 2006 11:31 pm ] |
| Post subject: | Frankin Rene |
Stage 1 Complete Ready for Lift off! A Jeep Is Reborn!!!!!!!!!!!
Pinch Weld Before Front=12" back 12.5" Pinch Weld After Front=16.125" Back=16.125" Before
After
Before
After
Before
After
Under
Road Flex
Adding mud this weekend |
|
| Author: | 2006KJSPORT4x4 [ Sat Jul 15, 2006 3:05 am ] |
| Post subject: | |
looking mighty fine there sir 
|
|
| Author: | JFortier777 [ Sat Jul 15, 2006 9:47 am ] |
| Post subject: | |
BAh! Thats more than 4" of actual lift! LUCKY! I sure Hope I get the same result with mine. |
|
| Author: | Jeepjeepster [ Sat Jul 15, 2006 11:28 am ] |
| Post subject: | |
JFortier777 wrote: BAh!
Thats more than 4" of actual lift! LUCKY! I sure Hope I get the same result with mine. It settles, and he added tires. |
|
| Author: | JFortier777 [ Sat Jul 15, 2006 12:15 pm ] |
| Post subject: | |
Jeepjeepster wrote: It settles, and he added tires.
Oh. GG I didnt know he added tires, lol.s |
|
| Author: | Mutt [ Sat Jul 15, 2006 1:24 pm ] |
| Post subject: | |
Jeepjeepster wrote: JFortier777 wrote: BAh! Thats more than 4" of actual lift! LUCKY! I sure Hope I get the same result with mine. It settles, and he added tires. Results may vary. My tires are 31" and I'm close to 18" at the pinch welds. Rig looks great by the way, good job. |
|
| Author: | JFortier777 [ Sat Jul 15, 2006 2:11 pm ] |
| Post subject: | |
Mutt wrote: Jeepjeepster wrote: JFortier777 wrote: BAh! Thats more than 4" of actual lift! LUCKY! I sure Hope I get the same result with mine. It settles, and he added tires. Results may vary. My tires are 31" and I'm close to 18" at the pinch welds. Rig looks great by the way, good job. Yes mutt we all know that you have the tallest liberty on mother earth. 
|
|
| Author: | Mutt [ Sat Jul 15, 2006 2:18 pm ] |
| Post subject: | |
JFortier777 wrote: Mutt wrote: Jeepjeepster wrote: JFortier777 wrote: BAh! Thats more than 4" of actual lift! LUCKY! I sure Hope I get the same result with mine. It settles, and he added tires. Results may vary. My tires are 31" and I'm close to 18" at the pinch welds. Rig looks great by the way, good job. Yes mutt we all know that you have the tallest liberty on mother earth. Nah, JeepinAl has got me beat. |
|
| Author: | Infrared06 [ Sat Jul 15, 2006 3:07 pm ] |
| Post subject: | |
That was 16.125" before my new tires. 17" Front and back after the tires. I Wheeled pretty hard today I will post my mud shots. |
|
| Author: | adamkrz [ Sat Jul 15, 2006 7:41 pm ] |
| Post subject: | |
How many miles on your rene?It looks new,Also was there any problems with your install?About how much time and if any help was needed,Thanks---It looks graet.. |
|
| Author: | Infrared06 [ Sat Jul 15, 2006 9:44 pm ] |
| Post subject: | |
It's a 2006 with 6000 miles Got Mudy today!!! 
My Install took about 3.5 Hours, I had two friends help me. I would say its a two person job but i guess it could me done alone its much easyer with help. The back took us about an 1 hour the front pasanger side 1.5 hours drivers front .5 Hour .5 hour to button up under the hood. There is a big learning curv once you know what to do it goes faster. See my car domain page I have pics of the install if you want to see! http://www.cardomain.com/ride/2356979/3 |
|
| Author: | TnRebel [ Sun Jul 16, 2006 11:58 am ] |
| Post subject: | |
Watch hitting the mud holes to hard -- that part that looks like a skid under the front, is only made of plastic and is held on by double face tape. Mine came off in a mud hole 
|
|
| Author: | JFortier777 [ Sun Jul 16, 2006 12:02 pm ] |
| Post subject: | |
And mine came off in a water crossing. |
|
| Author: | Infrared06 [ Sun Jul 16, 2006 2:48 pm ] |
| Post subject: | |
Thanks for the heads up I saw how it was attached when I was hacking the xtra plastic off the front. I thought of hacking it off anyway but I want to wait until I get a new bumper. I cant decide on an ARB or a Rock Lizard when it is done. |
|
| Author: | Renegade07 [ Sun Jul 23, 2006 2:17 am ] |
| Post subject: | |
hey, the renegade looks awesome...mine will be really similar soon...i was just wondering what kind of gas mileage you were getting after the lift and tires. thanks |
|
| Author: | Infrared06 [ Mon Jul 24, 2006 1:38 pm ] |
| Post subject: | |
I get about 18 mpg on my daily drive to work mostly highway. I used to get around 20 mpg before the lift. I think its more than woth it!!! |
|
| Author: | Renegade07 [ Tue Jul 25, 2006 1:33 am ] |
| Post subject: | |
ohh yeah def. worth it...but man you are getting better mpg than me stock...but i deal with the ozark mountains...still wont stop me though...ive got items on order then we will be near twins...thanks for the info |
|
| Author: | Infrared06 [ Tue Jul 25, 2006 7:31 am ] |
| Post subject: | |
My daily drive is almost all highway and no big hills it makes a huge difference in mpg. I get about 16 mpg on the back roads to PA. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|