LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

2005 LTD 3 1/2" Lift 245/70R17s ARB Bar Needs LOST stic
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=6&t=11675
Page 1 of 1

Author:  Outback [ Wed Aug 23, 2006 8:41 am ]
Post subject:  2005 LTD 3 1/2" Lift 245/70R17s ARB Bar Needs LOST stic

Image

Author:  PBrug [ Wed Aug 23, 2006 9:34 am ]
Post subject: 

Looks good.

What type of lift are you running and how do you like the Cooper S/T's?

Author:  warblade666 [ Wed Aug 23, 2006 1:11 pm ]
Post subject: 

WOW, 3.5"s of lift looks great!

What kind of lift is it? Custom?

Author:  Outback [ Wed Aug 23, 2006 7:50 pm ]
Post subject: 

Lift is Suburban (local Sydney Co) they use OME struts, shocks and springs with custom spacers.
The Cooper ST's are great, a little more noise than the stock ATR's but still handle well on the road. The 10ply walls seem to keep the tyres on the rims at low pressure without beadlockers. One of the few tyres we can get in OZ in 245 or 265 70R17s. Someone here has fitted the 265s but needed to spend some time with the angle grinder to stop rubbing.
All I need now is a brain transplant and some disconnects to give me a little more wheel travel up front.

Author:  JsCRD KJ [ Fri Aug 25, 2006 1:04 am ]
Post subject: 

Why do the names of the same vehicles change in other countries? for instance, I have seen several jeep liberties overseas that say "cherokee" althought they are clearly KJs...

Author:  Tokyojoe [ Fri Aug 25, 2006 1:12 am ]
Post subject: 

Because overseas, there is a vehicle already called the Liberty so D/C kept the Cherokee name for the KJ overseas.

Author:  RespectMyLibertay [ Fri Aug 25, 2006 2:53 pm ]
Post subject: 

Can we get a pic of your CV angles while on level ground?

Author:  Outback [ Sun Aug 27, 2006 8:27 am ]
Post subject:  CV Angles with 3 1/2" lift

Sorry couldn't find any shots on the ground showing CV angles!
http://img205.imageshack.us/img205/2757/kjupgc0.jpg

Author:  zeero [ Sun Aug 27, 2006 11:54 am ]
Post subject: 

cool pic right there though :wink:

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/